RCF VSA 1250 W MKII [8/18] Notes about the rdnet software

ENGLISH

LEDS ON THE BOTTOM PANEL COVER

during The speaker sTarT-up (afTer swiTching on, ca. 15 seconds) all The 4 leds are flashing.

From left to right:

1 AC (green)

When lit: AC power supply (mains: 230 / 115 V) is present and the speaker is operating.

2 DC (green)

When lit: 24 V DC power supply is present and the speaker is operating.

If batteries are not connected (or not available) or the voltage is lower than the minimum

threshold, this LED will be off.

if boTh AC and DC leds (only) are flashing, The speaker is in sTand-by mode.

3 FAULT (yellow)

When lit: a fault has been detected.

4 PRIORITY (red)

When lit: the priority function (of the PRIORITY AUDIO INPUT

) is activated by the

respective contact

LEDS ON THE BOTTOM PANEL

COVER

NOTES ABOUT THE RDNET SOFTWARE

RDNET SOFTWARE INSTALLATION

The RDNET software is protected by international copyright laws and is to be used to

conﬁgure the RCF RDNET system devices only.

It is not allowed to modify or change or try to decompile this software.

In no event shall RCF S.p.A. be liable to end-users for any damage whatsoever, including

but not limited to ﬁnancial damages for loss of business proﬁts or business information

due to the software use or inability to use this product.

The foregoing provision is effective even if RCF S.p.A. has been advised of the possibility

of such damages.

Even if the SOFTWARE has any material, veriﬁable and reproducible program errors, RCF

S.p.A. shall have no obligation to modify such errors.

MiniMuM RequiReMent: a PC with either MiCrosoft ‘windows® Vista’ or ‘7’

(or later) oPerating systeM, haVing an aVailable Usb Port.

Before installing a new software release, it is necessary to remove the previous

version (if installed). Verify also that the new release is the right one for the PC

operating system: either 32-bit or 64-bit.

Run rcf_rdnetsetup_(versione).exe to start the setup wizard.

Click NEXT > to proceed.