RCF HDL 30-A (13000511) 72033594 [4/32] General safety instruction and warnings

2. GENERAL SAFETY INSTRUCTION AND WARNINGS

IMPORTANT NOTE

Before connecting using or rigging the system, please read this instruction manual carefully and keep it on hand for

future reference. The manual is to be considered an integral part of the product and must accompany the system when

it changes ownership as a reference for correct installation and use as well as for the safety precautions. RCF S.p.A. will

not assume any responsibility for the incorrect installation and/or use of the product.

WARNING

• To prevent the risk of ﬁre or electric shock, never expose this equipment to rain or humidity.

• The system HDL line arrays should be rigged and ﬂown by professional riggers or trained personnel under

professional riggers’ supervision.

• Before rigging the system carefully read this manual.

SAFETY PRECAUTIONS

1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important

information.

2. Power supply from mains. The mains voltage is sufﬁciently high to involve a risk of electrocution; install and connect

this product before plugging it in. Before powering up, make sure that all the connections have been made correctly

and the voltage of your mains corresponds to the voltage shown on the rating plate on the unit, if not, please

contact your RCF dealer. The metallic parts of the unit are earthed through the power cable. An apparatus with

CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. Protect the

power cable from damage; make sure it is positioned in a way that it cannot be stepped on or crushed by objects. To

prevent the risk of electric shock, never open this product: there are no parts inside that the user needs to access.

3. Make sure that no objects or liquids can get into this product, as this may cause a short circuit. This apparatus

shall not be exposed to dripping or splashing. No objects ﬁlled with liquid, such as vases, shall be placed on this

apparatus. No naked sources (such as lighted candles) should be placed on this apparatus.

4. Never attempt to carry out any operations, modiﬁcations or repairs that are not expressly described in this manual.

Contact your authorized service centre or qualiﬁed personnel should any of the following occur:

- the product does not function (or functions in an anomalous way).

- the power cable has been damaged.

- objects or liquids have got in the unit.

- the product has been subject to a heavy impact.

5. If this product is not used for a long period, disconnect the power cable.

6. If this product begins emitting any strange odours or smoke, switch it off immediately and disconnect the power

cable.

7. Do not connect this product to any equipment or accessories not foreseen.

For suspended installation, only use the dedicated anchoring points and do not try to hang this product by using

elements that are unsuitable or not speciﬁc for this purpose. Also check the suitability of the support surface to

which the product is anchored (wall, ceiling, structure, etc.), and the components used for attachment (screw

anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system / installation

over time, also considering, for example, the mechanical vibrations normally generated by transducers.

To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is speciﬁed

in the user manual.

8. RCF S.p.A. strongly recommends this product is only installed by professional qualiﬁed installers (or specialised

ﬁrms) who can ensure correct installation and certify it according to the regulations in force.