Luxstahl MARCO SP9 Head [6/16] Information

INFORMATION

Boiler Modes of Operation

Ensure the boiler is set to SP9 Mode for use with the SP9 Head.

Setup Mode

• To enter setup mode press power and set buttons on the front panel at the same time.

• The display will show “USER SETUP” message.

• Release the buttons now to enter the user setup mode.

• To enter advanced settings keep the buttons pressed until the display shows “SERVICE SETUP” mes-

sage and then release them.

• In both setup modes use front panel buttons to navigate the settings:

• Power button to scroll through the functions.

• Set button to increase set value (press and hold for auto-repeat).

User Setup Options

The default temperature in the tank is 95°. The user can set the temperature of the tank. Use the naviga-

tion instructions above to change the temperature.

NOTE: Temperature should never be set for more than 96°C because it may cause steam to be generated

during low pressure days.

Service Setup Options

22.0°C

WAIT...

DESCALE: OFF

FILTER: OFF

INLET TIME: 03.0

DEAD TIME: 12.0

Live read-out of the tank temperature

Current machine status

Sets and shows remaining weeks before de-scaling is needed (“DES-

CALE TANK” message on the screen). Setting it to OFF will disable the

function. Range: 1 – 60 weeks. Default value: OFF

Sets and shows remaining litres of water before lter change is needed

(“CHANGE FILTER” message on the screen). Setting it to OFF will

disable the function. Range: 100 – 9900 litres. Default value: OFF

This is a factory setting and should only be changed by trained

personnel.

This is a factory setting and should only be changed by trained

personnel.