L-ACOUSTICS LA8 [27/56] Operation operation operation operation

When switched on (Figure 14), the controller goes through a 25-second start-up sequence, displaying an empty screen

followed by the messages below. The controller is ready for use when the LCD displays the main screen [7.2.1].

When switched off, the controller goes through a shutdown sequence coming with the following message:

If a power loss occurs for less than 10 seconds while the controller is on and no signal is passing through

the amp, the controller will remain on and will not shut down.

If the power has been lost for more than 10 seconds, the controller will shut down but all parameters will

be restored to same state as before shutting down when the controller switches on again.

The controller can be put in standby mode from LA NETWORK MANAGER Software to prevent any front

panel control and reduce electrical consumption (refer to the LA NETWORK MANAGER User manual [3.4]). In

this case, the following message will be displayed while the controller is in standby mode:

Message displayed with LOAD LED lit.