AMERICAN DJ LED Pixel 4C [5/12] Default running mode

ADJ Products, LLC - www.adj.com - LED Pixel 4C User Manual Page 10ADJ Products, LLC - www.adj.com - LED Pixel 4C User Manual Page 9

LED Pixel 4C Operating Instructions

the different modes.

• AJXX = Color Change mode, there are 24 Color Change modes to

choose from. Use the UP or DOWN buttons to scroll through the

different Auto Change modes.

• AFXX = Color Fade mode, there are 24 Color Fade modes to choose

from. Use the UP or DOWN buttons to scroll through the different

Auto Fade modes.

Static Color Mode:

1. Plug the fixture in and press the MODE button until “S-XX” is dis-

played. “XX” represents the current LED Pixel Tube being controlled.

If “S-FU” is displayed then all of the tubes are being controlled. If

“S-01” is displayed, you are controlling the tube connected to port 1.

If “S-02” is displayed, you are controlling the tube connected to port

2. If “S-03” is displayed, your controlling the tube connected to port

3. If “S-04” is displayed, you are controlling the tube connected to

port 4. After deciding what tube to control press the SET UP button.

2. After pressing the SET UP button “CLXX” will be displayed.

LED Display On/Off:

To set the LED display to turn off after 10 seconds, press the MODE but-

ton until “dXXX” is displayed. “XXX” represents either “on” or “oFF”.

Press the UP or DONW buttons so that “doff” is displayed. Now the

display will disappear after 10s. Press any button to turn the display on

again. Be advised though that the display will turn off automatically after

10 seconds.

“don” = LED display on at all times.

“doFF” = LED display shuts off after 10 seconds.

LED Pixel 4C Operating Instructions

LED Display Inversion:

Default Running Mode:

This is a default running mode. When this mode is activated all modes

will return to their default settings.

1. Plug the fixture in and press the MODE button until “dXXX” is dis-

played.

2. Press the SET UP button until “dEFA” is displayed.

3. Press the UP and DOWN buttons simultaneously. Press the MODE

button to exit.

Infrared Receiver:

This function is used to activate and deactivate the infrared receiver.

either “on” or “oF”.

3. Press the UP or DOWN buttons to either activate the remote func-

tion (On) or deactivate it (Off).