LE MAITRE G-Force 2 DMX [2/7] Safety and cautions

Safety and Cautions

All electro-mechanical machines have the ability to cause injury, either

mechanically or electrically. The user should be fully aware of the correct

operational procedures involved in the use of this machine, and should feel

comfortable about being in control of it.

All users should make themselves aware of any national or local

restrictions to the use of these types of machines in applications involving

public venues or areas.

Users should be aware of all regulations and advice on the use of Smoke

and Haze machines.

The safe employment of this machine is strictly the responsibility of the

user.

As with all vaporiser principle machines, exit nozzles will be very hot and

capable of causing burns. Please take note of the warning labels.

Do not touch or obstruct these nozzles.

Under adverse conditions, tiny particles of hot fluid could issue close to

the machine – Never aim at persons or allow such operating conditions to

occur, and maintain a 3m safety clearance.

There are ventilation holes at the rear, and on the top of the machine, these

should not be covered or obstructed. Similarly the fan inlet hole on the

back of the machine should not be covered and should be allowed enough

air space to operate effectively.

The machine should be electrically earthed, and should never be operated

or connected to an unsafe supply.

The machine should not be connected to a ‘noisy’ or spike laden power

supply.

Spilled fluid or splashed fluid droplets can be a slip hazard. Comply with

regulations when clearing or disposing of fluid.

Take note of any warning/advice notices attached to the fluid containers.

Do not operate the machine with any covers removed.

The machine should not be operated with smoke recycling through the

ventilation system, as this could cause electronic failure.