LE MAITRE G-Force 2 DMX [7/7] Warranty

By setting (in manual mode), the USE DMX channels to ‘NO’, these channels can be

used by other equipment without affecting the machine.

To restore Manual mode operation from switch on, just press Manual and Store

buttons and wait for the status LED to blink.

When heating from cold ( approx 6 minutes for maximum performance), the display

will indicate ‘Heating up’ and the heat exchanger temperature until the minimum

working temperature is reached. (R.T.O. in approx 4 minutes)

At this point, if the Select position is on SMOKE, and the output is set to maximum,

then the actual available output will be indicated.

At the SMOKE display position, the left LED digit ‘bars’ will indicate three levels of

heat exchanger temperature. Low = 1 bar, Medium = 2 bars, High = 3 bars. At the

‘settling’ temperature, at which maximum performance is available, the horizontal and

vertical bars will flash alternately.

Warranty

The Le Maitre® Ltd G-Force 2 is sold with a one year’s warranty, which includes parts

and labour from the date of purchase. This warranty covers manufacturing defects,

providing that the unit has been regularly serviced by an authorised agent and has

only used genuine Le Maitre® fluid.

Le Maitre® Ltd considers all of its products to be safe for use in the application it was

intended. Le Maitre® Ltd takes no responsibility for misuse or incorrect use. Always

refer to the equipment owner’s manual for proper use, and be aware of local

legislation governing the products use.

http://acctech.ru/cat/dym_machine_generator/