Infiniti G37 Convertible (2010) [321/444] 10 15 09 tbrook

To set cruising speed, accelerate your vehicle to

the desired speed, push the SET/COAST switch

and release it. (Vehicle ahead detection indica-

tor, set distance indicator and set vehicle speed

indicator come on.) Take your foot off the

accelerator pedal. Your vehicle will maintain the

set speed.

When the SET/COAST switch is pushed under

the following conditions, the system cannot be

set and the ICC indicators will blink for approxi-

mately 2 seconds.

● When traveling below 25 MPH (40 km/h) and

the vehicle ahead is not detected

● When the selector lever is not in the D, DS or

Manual mode

● When the windshield wipers are operating at

low (LO) or high speed (HI)

● When the rain sensing auto wiper system is

operated and the wiper speed is at least the

same as the LO (low ) position speed

● When the brakes are operated by the driver

When the SET/COAST switch is pushed under

the following conditions, the system cannot be

set.

A warning chime will sound and the ICC indica-

tors will blink.

● When the VDC system is off (To use the ICC

system, turn on the VDC system. Push the

MAIN switch to turn off the ICC system and

reset the ICC switch by pushing the MAIN

switch again.)

For details about the VDC system, see “VE-

HICLE DYNAMIC CONTROL (VDC) SYSTEM”

later in this section.

● When ABS or VDC (including the traction

control system) is operating

SSD0609 SSD0784 SSD0614

5-30 Starting and driving

췽 —

—

10/15/09—tbrooks

墍