Infiniti G37 Convertible (2010) [43/444] 10 14 09 tbrook

6. Remove any additional slack from the

seat belt; press downward and rearward

firmly in the center of the child restraint

with your knee to compress the vehicle

seat cushion and seatback while pulling

up on the seat belt.

7. After attaching the child restraint, test it

before you place the child in it. Push it

from side to side while holding the seat

near the seat belt path. The child restraint

should not move more than 1 inch (25 mm)

from side to side. Try to tug it forward and

check to see if the belt holds the restraint

in place. If the restraint is not secure,

tighten the belt as necessary, or put the

restraint in another seat and test it again.

You may need to try a different child

restraint. Not all child restraints fit in all

types of vehicles.

8. Check that the retractor is in the ALR

mode by trying to pull more seat belt out

of the retractor. If you cannot pull any

more belt webbing out of the retractor,

the retractor is in the ALR mode.

9. Check to make sure the child restraint is

properly secured prior to each use. If the

seat belt is not locked, repeat steps 3

through 8.

Front-facing — step 6

SSS0653

Front-facing — step 7

SSS0641

1-26 Safety — Seats, seat belts and supplemental restraint system

췽 —

—

10/14/09—tbrooks

墍