Infiniti FX35 (2006) [112/392] Warning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti FX35 (2006) [112/392] Warning

Infiniti FX45 (2006) [112/392] Warning
WARNING
O Do not use the HomeLink Universal
Transceiver with any garage door opener
that lacks safety stop and reverse fea-
tures as required by federal safety stan-
dards. (These standards became effec-
tive for opener models manufactured
after April 1, 1982). A garage door
opener which cannot detect an object in
the path of a closing garage door and
then automatically stop and reverse,
does not meet current federal safety
standards. Using a garage door opener
without these features increases the risk
of serious injury or death.
O During the programming procedure, your
garage door or security gate will open or
close (if the transmitter is within range).
Make sure that people and objects are
clear of the garage door, gate, etc. that
you are programming.
O Your vehicle’s engine should be turned
off while programming the HomeLink
Universal Transceiver.
PROGRAMMING HomeLink
To program your HomeLink Universal
Transceiver to operate a garage door, gate,
or entry door opener, home or office
lighting, you need to be at the same loca-
tion as the device. Note: Garage door open-
ers (manufactured after 1996) have
“rolling code protection”. To program a ga-
rage door opener equipped with “rolling
code protection”; you will need to use a
ladder to get up to the garage door opener
motor to be able to access the “smart or
learn” program button.
1. To begin, press and hold the 2 outer
HomeLink
buttons (to clear the
memory) until the indicator light
j
A
blinks (after 20 seconds). Release both
buttons.
2. Position the end of the hand-held trans-
mitter 1-3 inches away from the
HomeLink
surface.
SIC3040
2-48 Instruments and controls
Z 05.11.1/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать