Infiniti FX35 (2006) [261/392] Caution
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti FX35 (2006) [261/392] Caution

Infiniti FX35 (2006) [261/392] Caution
Operating conventional (fixed
speed) cruise control mode
To turn on the conventional (fixed speed)
cruise control mode, push and hold the
MAIN switch
j
A
for longer than about 1.5
seconds.
When pushing the MAIN switch on, the In-
telligent Cruise Control system display and
the CRUISE indicator light (Green) in the in-
strument cluster come on. After you hold
the MAIN switch on for longer than about
1.5 seconds, the Intelligent Cruise Control
system display goes out. The CRUISE indi-
cator stays lit. You can now set your de-
sired cruising speed. Pushing the MAIN
switch again will turn the system com-
pletely off.
When the ignition switch is turned off, the
system is also automatically turned off. To
use the Intelligent Cruise Control again,
quickly push and release the MAIN switch
(vehicle-to-vehicle distance control mode)
or push and hold it (conventional cruise
control mode) again to turn it on.
CAUTION
To avoid accidentally engaging cruise con-
trol, make sure to turn the ON/OFF switch off
when not using the Intelligent Cruise Con-
trol.
To set cruising speed, accelerate your ve-
hicle to the desired speed, push the
SET/COAST switch and release it. (The SET
indicator light will come on.) Take your foot
off the accelerator pedal. Your vehicle will
maintain the set speed.
O To pass another vehicle, depress the
accelerator pedal. When you release
the pedal, the vehicle will return to the
previously set speed.
O The vehicle may not maintain the set
speed when going up or down steep
hills. If this happens, manually main-
tain vehicle speed.
To cancel the preset speed, use any of the
following methods:
a) Push the CANCEL button. The SET indi-
cator light will go out.
b) Tap the brake pedal. The SET indicator
light will go out.
c) Turn the MAIN switch off. Both the
CRUISE indicator and SET indicator
lights will go out.
To reset at a faster cruising speed, use one
of the following three methods:
a) Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
b) Push and hold the RESUME/
ACCELERATE set switch. When the ve-
hicle attains the speed you desire, re-
lease the switch.
c) Push, then quickly release the
RESUME/ACCELERATE switch. Each
time you do this, the set speed will in-
crease by about 1 MPH (1.6 km/h).
SSD0551
Starting and driving 5-43
Z 05.11.1/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать