Infiniti FX35 (2006) [150/392] Initialize entry exit function

Infiniti FX45 (2006) [150/392] Initialize entry exit function
lock position with the driver’s door
open.
The driver’s seat and steering wheel will re-
turn to the previous position:
O When the key is inserted into the igni-
tion switch or the ignition switch (if so
equipped) is pushed in after closing the
door.
O When the driver’s door is closed with
the key turned to LOCK.
O When the key or the ignition switch is
turned from ACC to ON with the driver’s
door open.
The entry/exit feature can be adjusted or
canceled. See “Vehicle electronic systems”
in the “4. Display screen, heater, air condi-
tioner and audio systems” section of this
manual.
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function will
not work even if it has been set. After re-
connecting the battery or replacing the
fuse, open and close the driver’s door sev-
eral times after inserting the electronic key
into the ignition switch. The entry/exit
function will be activated.
System operation
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
O when the vehicle speed is above 4 MPH
(7 km/h).
O when any two or more of the memory
switches are simultaneously pushed
while the automatic drive positioner is
operating.
O when the adjusting switch for the driv-
er’s seat is turned on while the auto-
matic drive positioner is operating.
O when the memory switch 1 or 2 is not
pushed for at least 1 second.
O when the seat has been already moved
to the memorized position.
O when no seat position is stored in the
memory switch.
The automatic drive positioner system can
be adjusted and canceled. See “Automatic
seat slide in getting off” and “Lift steering
column when exiting vehicle” in the “4.
Display screen, heater, air conditioner and
audio systems” section.
3-34 Pre-driving checks and adjustments
Z 05.11.1/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать