Infiniti FX35 (2006) [247/392] S50 d v5
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti FX35 (2006) [247/392] S50 d v5

Infiniti FX35 (2006) [247/392] S50 d v5
O When your vehicle is towing a trailer,
etc.
The ICC system is designed to automati-
cally check the sensor’s operation. When
the sensor is covered with dirt or obstruc-
tions, the system will automatically be can-
celed. If the sensor is covered with ice, a
transparent or translucent vinyl bag, etc.,
the ICC system may not detect them. In
these instances, the vehicle-to-vehicle dis-
tance control mode may not cancel and
may not be able to maintain the selected
following distance from the vehicle ahead.
Be sure to check and clean the sensor regu-
larly.
The vehicle-to-vehicle distance control
mode is designed to maintain a selected
distance and reduce the speed to match
the slower vehicle ahead; the system will
decelerate the vehicle as necessary. How-
ever, the ICC system can only apply up to
25% of the vehicles total braking power.
This system should only be used when traf-
fic conditions allow vehicle speeds to re-
main fairly constant or when vehicle
speeds change gradually. If a vehicle
moves into the traveling lane ahead or if a
vehicle traveling ahead rapidly deceler-
ates, the distance between vehicles may
become closer because the ICC system
cannot decelerate the vehicle quickly
enough. If this occurs, the ICC system will
sound a warning chime and blink the
system display to notify the driver to take
necessary action.
The system will cancel and a warning
chime will sound if the speed falls below
approximately 20 MPH (32 km/h). The
system will also disengage below the 20
MPH (32 km/h) cut-off speed or over the
maximum set speed.
Refer to “Approach warning” later in this
section.
The following items are controlled in the
vehicle-to-vehicle distance control mode:
O When there are no vehicles traveling
ahead, the vehicle-to-vehicle distance
control mode maintains the speed set
by the driver. The set speed range is be-
tween approximately 25 and 90 MPH
(40 and 144 km/h).
O When there is a vehicle traveling ahead,
the vehicle-to-vehicle distance control
mode adjusts the speed to maintain the
distance, selected by driver, from the
vehicle ahead. The adjusting speed
range is between approximately 20
MPH (32 km/h) and up to the set speed.
O When the vehicle traveling ahead has
moved out from its lane of travel, the
vehicle-to-vehicle distance control
mode accelerates and maintains ve-
hicle speed up to the set speed.
The ICC system does not control vehicle
speed or warn you when you approach sta-
tionary and slow moving vehicles. You
must pay attention to vehicle operation to
maintain proper distance from vehicles
ahead when approaching toll gates or
traffic congestion.
Starting and driving 5-29
Z 05.11.1/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать