Infiniti FX35 (2006) [149/392] Confirming memory storage
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti FX35 (2006) [149/392] Confirming memory storage

Infiniti FX45 (2006) [149/392] Confirming memory storage
4. Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
fully for at least 1 second.
The indicator light for the pushed memory
switch will come on and stay on for ap-
proximately 5 seconds after pushing the
switch. After the indicator light goes off,
the selected positions are stored in the se-
lected memory (1 or 2).
If a new memory is stored in the same
memory switch, the previous memory will
be deleted.
Linking a keyfob or Intelligent Key
to a stored memory position
A keyfob or Intelligent Key can be linked to
a stored memory position with the fol-
lowing procedure.
1. Follow the steps for storing a memory
position.
2. While the indicator light for the memory
switch being set is illuminated for 5
seconds, press the
button on the
keyfob or Intelligent Key. The indicator
light will blink. After the indicator light
goes off, the keyfob or Intelligent Key is
linked to that memory setting.
With the key removed from the ignition
switch, press the
button on the
keyfob or Intelligent Key. The driver’s seat,
steering wheel and outside mirrors will
move to the memorized position.
Confirming memory storage
O Turn the ignition ON and push the SET
switch. If the main memory has not
been stored, the indicator light will
come on for approximately 0.5 sec-
onds. When the memory has stored the
position, the indicator light will stay on
for approximately 5 seconds.
O If the battery cable is disconnected, or
if the fuse opens, the memory will be
canceled. In such a case, reset the de-
sired positions using the following pro-
cedures.
1. Open and close the driver’s door more
than two times with the ignition key in
the LOCK position.
2. Reset the desired position using the
previous procedure.
Selecting the memorized position
1. Set the selector lever to the P (Park) po-
sition.
2. Turn the ignition ON.
3. Push the memory switch (1 or 2) fully
for at least 1 second.
The driver’s seat, steering column and out-
side mirrors will move to the memorized
position with the indicator light flashing,
and then the light will stay on for approxi-
mately 5 seconds.
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s
seat, steering column and door mirrors will
automatically move when the automatic
transmission selector lever is in the P
(Park) position. This allows the driver to get
into and out of the driver’s seat more
easily.
The driver’s seat will slide backward and
the steering wheel will move up:
O When the driver’s door is opened after
removing the key from the ignition
switch or the ignition switch (if so
equipped), or returning the ignition
switch to lock position.
O When the driver’s door is opened with
the key turned to LOCK.
O When the key is turned from ACC to
LOCK or returning the ignition switch to
Pre-driving checks and adjustments 3-33
Z 05.11.1/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать