Infiniti FX35 (2006) [95/392] Snow mode switch vehicle dynamic control vdc off switch

Push the LDW switch again or restart the

engine to turn the system on. Modes can

be changed to automatic mode or manual

mode by pushing and holding the LDW

switch for more than 4 seconds while the

LDW system ON indicator is off. See “Lane

departure warning (LDW) system” in the “5.

Starting and driving” section.

For driving or starting the vehicle on snowy

roads or slippery areas, turn on the SNOW

mode switch and the SNOW indicator light

on the meter panel will illuminate. When

the SNOW mode is activated, engine

output is controlled to avoid wheel spin.

The vehicle should be driven with the Ve-

hicle Dynamic Control (VDC) System on for

most driving conditions.

If the vehicle is stuck in mud or snow, the

VDC system reduces the engine output to

reduce wheel spin. The engine RPM will be

reduced even if the accelerator is de-

pressed to the floor. If maximum engine

power is needed to free a stuck vehicle,

turn the VDC system off.

To turn off the VDC system, push the VDC

OFF switch. The

indicator will come

on.

SSD0351 SIC1881

SNOW MODE SWITCH

VEHICLE DYNAMIC CONTROL (VDC) OFF

SWITCH

Instruments and controls 2-31

Z 05.11.1/S50-D/V5.0 X