ADJ Par Z Move [17/30] Par z move operating instructions

ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 16

Par Z Move Operating Instructions

ACCESS THE MAIN MENU BY PRESSING THE MENU BUTTON FOR AT LEAST 5 SECONDS.

DMX Address - DMX Address Setting.

1. Access the main menu and press the UP or DOWN buttons so that “DMX Settings” is higlighted

and press ENTER.

2. Press the UP or DOWN buttons until “DMX Address” is highlighted and press ENTER.

3. The current DMX address will now be displayed. Press the UP or DOWN buttons to nd your

desired DMX address and press ENTER to conrm your setting. Press the MENU button to exit

without any changes.

DMX CH Mode - This will let you select your desired DMX channel mode.

1. Access the main menu and press the UP or DOWN buttons so that “DMX Settings” is higlighted

and press ENTER.

2. Press the UP or DOWN buttons until “DMX CH Mode” is highlighted and press ENTER.

3. The current DMX channel mode will now be displayed. Press the UP or DOWN buttons to nd

your desired DMX channel mode and press ENTER to conrm your setting. Press the MENU

button to exit without any changes.

No DMX Status - This mode is used as a precaution mode. In case the DMX signal is lost

or interrupted, the operating mode chosen in this setup is the running mode the xture will revert

to when the DMX signal is lost.

1. Access the main menu and press the UP or DOWN buttons so that “DMX Settings” is higlighted

and press ENTER.

2. Press either the MENU, UP, or DOWN buttons until “No DMX Status” is highlighted and press

ENTER.

3. Press the UP or DOWN buttons to nd the operating mode you would like the unit to automatically

revert to if the DMX signal is lost or interrupted.

- Hold Last - If the DMX signal is lost or interrupted, the unit will stay in the last DMX setting.

- Blackout - If the DMX signal is lost or interrupted, the unit will automatically go into standby mode.

- Manual - If the DMX signal is lost or interrupted, the unit will default to the settings made under the

“Manual Control” function. See “Manual Control” on page 20 for more information.

4. Once you have found your desired setting press ENTER to conrm. Press the MENU button to exit.