ADJ Par Z Move [20/30] Reset motor

ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 19

Par Z Move Operating Instructions

Gamma - In this menu you are able to make gamma corrections.

1. Access the main menu and press the UP or DOWN buttons so that “Personality” is highlighted

then press ENTER.

2. Use the UP or DOWN buttons to adjust the gamma brightness.

3. Once you have found your desired setting press ENTER to conrm.

Reset Motors - This will allow you to reset the pan/tilt motor, zoom motor, or all motors.

1. Access the main menu and press the UP or DOWN buttons so that “Personality” is highlighted then

press ENTER.

2. Press the UP or DOWN buttons until “Reset.Motor” is highlighted, then press ENTER.

3. Press the UP or DOWN buttons to nd the motors you would like to reset.

4. Press the ENTER button to reset or press the MENU button to exit.

Display - This submenu has four functions: (1). Adjust the display intensity (2). Invert the

display (3). Activate and adjust the display screen blackout time (4). Activate and deactivate

the display control panel lock.

1. Access the main menu and press the UP or DOWN buttons so that “Personality” is highlighted then

press ENTER.

2. Use the UP or DOWN buttons to switch between “Intensity”, “Display Invert”, and “Screen

Saver Delay”. Press the ENTER button to select the setting you would like to adjust.

3. Use the UP or DOWN buttons to toggle between “ON” and “OFF” for each function.

- Intensity - Use the UP or DOWN buttons to adjust the display intensity between “1” being the

dimmest and “10” being the brightest. Press the ENTER button to conrm your adjustment.

- Display Invert - “YES” will invert the display, and “NO” will keep the display the same . Press the

ENTER button to conrm your adjustment.

- Screen Saver Delay - Use the UP or DOWN buttons to adjust the display intensity between “1”

being the dimmest and “10” being the brightest. Press the ENTER button to conrm your adjustment.

- Display Lock - “ON” will lock the display control after 30 seconds, and “OFF” will leave the display

control unlocked. To unlock the display press the MENU button for at least 5 seconds.

4. Once you have found your desired settings press the ENTER button to conrm.