ADJ Par Z Move — руководство по устранению неполадок и чистке светового оборудования [28/30]

Превью страниц Страница 28 / 30

ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 27

Par Z Move Trouble Shooting

Par Z Move Cleaning

Listed below are a few common problems the user may encounter, with solutions.

Unit not responding to DMX:

1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on

some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right

connectors; it does matter which way the inputs and outputs are connected.

2. Check the DMX address setting.

3. Try using another DMX controller.

One of the channels is not working:

1. The stepper motor might be damaged or the cable connected to the PCB is broken.

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be car-

ried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2. Clean the external optics with glass cleaner and a soft cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-

due, dust, dew).

Par Z Move Multiple Unit Power Linking

With this feature you can connect the xtures to one another using the power cable input and

output sockets.

NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES AS THE POWER

CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON

THIS FIXTURE! CHECK SILK SCREEN FOR MAX AMPS.