KRAFT TCH-DM604D1202SBI [40/56] Встраиваемая посудомоечная машина built in dishwasher

ВСТРАИВАЕМАЯ ПОСУДОМОЕЧНАЯ МАШИНА

BUILT-IN DISHWASHER

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

The manufactory setting: H3. Contact your local water board for information on the hardness of

your water supply.

Filling the water softener tank

Always use salt intended for dishwasher use. The salt container is located beneath the lower

basket and should be filled as explained in the following. Please follow the steps below for adding

dishwasher salt:

1. Remove the lower basket and unscrew the reservoir cap.

2. Place the end of the funnel (supplied) into the hole and pour in about 1.5 kg of dishwasher salt.

3. Fill the salt container to its maximum limit with water, it is normal for a small amount of water to

come out of the salt container.

4. After filling the container, screw back the cap tightly.

5. The salt warning light will stop being after the salt container has been filled with salt.

6. Immediately after filling the salt into the salt container, a washing program should be started (We

suggest to use a short program). Otherwise the filter system, pump or other important parts of

the machine may be damaged by salty water. This is out of warranty.

WARNING!

• Only use salt specifically designed for dishwashers use! Every other type of salt not specifically

designed for dishwasher use, especially table salt, will damage the water softener. In case of

damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor

is liable for any damages caused.

• Only fill with salt before running a cycle. This will prevent any grains of salt or salty water, which

may have been spilled, remaining on the bottom of the machine for any period of time, which

may cause corrosion.

• The salt container must only be refilled when the salt warning light () in the control panel comes

on. Depending on how well the salt dissolves, the salt warning light may still be on even though

the salt container is filled.

• If salt has spilled, run a soak or quick program to remove it.

2. Rinse aid

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes,

which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes.

Your dishwasher is designed to use liquid rinse aids.

WARNING! Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with

any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the

appliance.