KRAFT TCH-DM604D1202SBI [50/56] Встраиваемая посудомоечная машина built in dishwasher

KRAFT TCH-DM604D1202SBI [50/56] Встраиваемая посудомоечная машина built in dishwasher
ВСТРАИВАЕМАЯ ПОСУДОМОЕЧНАЯ МАШИНА
BUILT-IN DISHWASHER
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
50
Problem Possible Causes What To Do
Suds in the tub
Wrong detergent.
Use only the special dishwasher detergent to avoid suds. If
this occurs, open the dishwasher and let suds evaporate.
Add 1 gallon of cold water to the bottom of the dishwasher.
Close the dishwasher door, then select any cycle. Initially,
the dishwasher will drain out the water. Open the door
after draining stage is complete and check if the suds have
disappeared. Repeat if necessary.
Spilled rinse-aid. Always wipe up rinse-aid spills immediately.
Stained tub
interior
Detergent with colourant may
have been used.
Make sure that the detergent has no colourant.
White film on
inside surface
Hard water minerals.
To clean the interior, use a damp sponge with dishwasher
detergent and wear rubber gloves. Never use any other
cleaner than dishwasher detergent otherwise, it may cause
foaming or suds.
There are rust
stains on cutlery
The affected items are not
corrosion resistant.
Avoid washing items that are not corrosion resistant in the
dishwasher.
A program was not run after
dishwasher salt was added.
Traces of salt have gotten
into the wash cycle.
Always run a wash program without any crockery after
adding salt. Do not select the Turbo function (if present),
after adding dishwasher salt.
The lid of the softer is loose. Check the softener lid is secure.
Knocking noise in
the dishwasher
A spray arm is knocking
against an item in a basket
Interrupt the program and rearrange the items which are
obstructing the spray arm.
Rattling noise in
the dishwasher
Items of crockery are loose in
the dishwasher.
Interrupt the program and rearrange the items of crockery.
Knocking noise in
the water pipes
This may be caused by on-
site installation or the cross-
section of the piping.
This has no influence on the dishwasher function. If in
doubt, contact a qualified plumber.
The dishes are
not clean
The dishes
are not clean
See PART II “Preparing And Loading Dishes”.
The program was
not powerful enough.
Select a more intensive program.
Not enough detergent
was dispensed.
Use more detergent, or change
your detergent.
Items are blocking the
movement of the spray arms.
Rearrange the items so that the spray
can rotate freely.
The filter combination is not
clean or is not correctly fitted
in the base of wash cabinet.
This may cause the spray
arm jets to get blocked.
Clean and/or fit the filter correctly.
Clean the spray arm jets.
Cloudiness on
glassware.
Combination of soft water
and too much detergent.
Use less detergent if you have soft water and select a
shorter cycle to wash the glassware and to get them clean.
White spots
appear on dishes
and glasses.
Hard water area can cause
limescale deposits.
Add more detergent.
Black or grey
marks on dishes
Aluminium utensils have
rubbed against dishes
Use a mild abrasive cleaner to eliminate those marks.

Содержание

Похожие устройства

Скачать