KRAFT TCH-DM604D1202SBI [52/56] Встраиваемая посудомоечная машина built in dishwasher

ВСТРАИВАЕМАЯ ПОСУДОМОЕЧНАЯ МАШИНА

BUILT-IN DISHWASHER

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

order of the disassembly, replace the filter insert, and rotate clockwise to the close arrow.

WARNING!

• Do not over tighten the filters. Put the filters back in sequence securely, otherwise coarse

debris could get into the system and cause a blockage.

• Never use the dishwasher without filters in place. Improper replacement of the filter may

reduce the performance level of the appliance and damage dishes and utensils.

Spray arms

It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm

jets and bearings. To clean the spray arms, follow the instructions below:

Frost precaution

Please take frost protection measures on the dishwasher in winter. Every time after washing

cycles, please operate as follows:

1. Cut off the electrical power to the dishwasher at the supply source.

2. Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain the water from the inlet pipe and water valve (use a pan to gather the water).

4. Reconnect the water inlet pipe to the water valve.

5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

After every wash

After every wash, turn off the water supply to the appliance and leave the door slightly open so that

moisture and odors are not trapped inside.

Before cleaning or performing maintenance, always remove the plug from the socket. To clean the

exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Only

use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a

cloth dampened with water a little vinegar, or a cleaning product made specifically for dishwashers.

When not in use for a longtime

It is recommended that you run a wash cycle with the dishwasher empty and then remove the plug

from the socket, turn off the water supply and leave the door of the appliance slightly open. This will

help the door seals to last longer and prevent odors from forming within the appliance.

Moving the appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can

be positioned on its back.