KRAFT Technology TCH-HD8586SW [40/76] Automatic washing machine

USER GUIDE

AUTOMATIC WASHING MACHINE

Clean the detergent cap and the detergent container by holding them under the water jet.

Wipe off any remaining detergent.

3. Replace the liquid detergent cap, slide the detergent container back into place.

WARNING Do not use abrasives, benzene, benzene, thinner, chloride, hot

water, metal or coarse brushes, etc. for cleaning, as they may damage the surfaces

of the washing machine.

ATTENTION! Do not rinse the detergent container that has not been removed

with water. Before starting the washing machine, make sure that the detergent

container is properly closed.

WATER DRAIN FILTER CLEANING

ATTENTION! To avoid getting burned, wait until the water left in the washing

machine cools down! The water tap must be turned o!

Clean the water drain and fill filter every 6 months:

1. If the appliance has not been drained, try to drain it now. press PROGRAM button

to select the Spin cycle, turn the spin cycle off by pressing the SPEED button, then

press the START/PAUSE button. Wait a few moments to let the pump drain the water

from the drum. If the pump is totally blocked, the water will be unable to drain and the

cycle will end.

2. Shut off the tap so that no more water flows in and has to be drained. Switch the

appliance off. Unplug the power plug.

3. Open the drain filter cover.

4. Use the pull-out drain hose located in the pump access opening to drain the remaining

1 2

3 4