KRAFT Technology TCH-HD8586SW [41/76] Troubleshooting

KRAFT Technology TCH-HD8586SW [41/76] Troubleshooting
41
USER GUIDE
AUTOMATIC WASHING MACHINE
water into a suitable container (up to 5.3U.S.gallon/20 liters of water may be drained).
Pull the sealing cap from the hose and lay the hose over the side of the container and
allow the water to finish draining from the drum. When finished, replace the sealing
cap into the end of the hose and restore the hose to its storage location.
5. Turn the pump cover counterclockwise to remove it. A small amount of residual water
may flow out when the cover is removed. Clean the interior of the pump hosing,
removing any debris or foreign objects. Check to be sure the impeller where at the
back of the pump housing can now turn freely. Remove any lint, debris or detergent
residue from the threads of the pump cover and the pump cover housing. Replace
the pump cover by screwing tightly into position. Handle must be vertically.
6. Close the drain filter cover. Wipe up any spilled water.
WATER SUPPLY FILTERS CLEANING
Turn off the tap, disconnect the hose from the tap,
and clean the filter screen with a small brush.
Disconnect the water supply hose from the washing
machine, pull out the filter screen with pliers, and
install it back after cleaning.
Connect the filling hose, open the tap, and make sure
there is no water leakage.
TECHNICAL MAINTENANCE
All electronic components (plug, electric cord, compressor, etc.) must only be re-
installed in certified service centers by qualified personnel.
In the event of a malfunction, you should always contact an authorized service cent-
er, specifying the type of problem and the model of your washing machine. Unqualified
repair removes the device from warranty service. Only original spare parts can be used
to repair the device.ли.
TROUBLESHOOTING
During operation, if any malfunctions are detected that the consumer cannot elimi-
nate on their own, it is necessary to contact the service center for the repair of washing
machines.
But before contacting the repair service, read this section. This list includes the most
common cases that are not the result of poor assembly quality or poor-quality materials
used in this device.
ATTENTION! Before troubleshooting, you must disconnect the product from
the mains. Troubleshooting that is not described in this manual should only be
carried out by a qualied electrician or a competent technician.
1 2
3 4

Содержание

Похожие устройства