Home
Главная
Brayer
Сушка Для Фруктов
BR1900
Руководство по эксплуатации Страница: 8

Brayer BR1900 Руководство по эксплуатации онлайн [8/60] 793781

Guide» section, see also the dehydration

temperature and time tables.

• Before dehydrating your foods, wash them, dry, and

chop or cut into thin slices.

• Lay out the foods onto grids (2) for dehydration at

a distance so as to ensure free passage of hot air

between the food chops or slices.

• Stack the grids (2) on top of one another. Make sure

there are at least three grids (2), even if some of

them are not lled.

Notes:

- stack the grids (2) on top of one another (g. 1)

if you use thin food slices or chops (up to 1 cm in

thickness);

- when drying thicker food bits (up to 2 cm in

thickness), rotate the upper tray (2) 180 degrees

relative to the lower tray (g. 2);

• Cover the grids (2) with the lid (1).

• Insert the power cord plug into the mains socket –

the «00:00» symbols will appear on the display (7).

• Press the timer/temperature set button «

» (5)

once – the default food dehydrator operation time

indicated by ashing symbols «10:00» will appear on

display (7).

• Use the timer/temperature set buttons «

(8) to set the food dehydrator operation time «00:30».

For quick dehydrator operation time setting press and

hold one of the timer/temperature set buttons «

» (8).

• Press the timer/temperature set button «

(5) again – the default food dehydrator operation

temperature indicated by ashing symbols «70ºС» will

appear on display (7).

• Use the timer/temperature set buttons «

» (8) to set the necessary drying temperature; the

display (7) will show the following symbols: «FAN»

- «35°C» - «40°C» - «45°C» - «50°C» - «55°C» -

«60°C» - «65°C» - «70°C». For quick food dehydration

temperature setting press on and hold down one of the

timer/temperature set buttons «

or » (8).

Note: while in the «FAN» operating mode, the heating

element is o󰀨, only the fan is on.

• To switch the dehydrator on, press the on/o󰀨 button «

» (6), the food dehydrator will switch on and the

preset operation time countdown will appear on the

display (7).

• The hot air comes from below the grids (2), the foods

on the lower grids (2) are a󰀨ected by the hot air and

dehydrate faster. For more even dehydration place

the foods with greater moisture content on the lower

grids (2).

• It is best to check the foods every hour or every other

hour. Should your foods dry unevenly, you can turn

them over or switch the grids (2) around.

• Before switching the grids (2) around, switch the food

dehydrator o󰀨, by pressing on/o󰀨 button «

» (6).

Brayer BR1900 Руководство по эксплуатации онлайн [8/60] 793781

Содержание

Похожие устройства