Bosch KEO 18 LI (без АКБ и ЗУ) [14/212] Battery charge indicator

Bosch KEO 18 LI (без АКБ и ЗУ) [14/212] Battery charge indicator
14 | English
Battery charge indicator
The battery charge indicator(5) indicates the remaining bat-
tery capacity or an overload when the power tool is switched
on.
LED Capacity
Continuous lighting 3x green ≥ 75%
Continuous lighting 2x green 40 − 75%
Continuous lighting 1x green 15 − 40%
Slow flashing 1x green 0 − 15%
Operation
Switching on and off (see figure G)
Firstly, press the lock-off button (7) and then the On/Off
switch(6). You can release the lock-off button (7) when the
power tool is running. The lock-off button (7) engages again
as soon as the power tool comes to a complete stop.
Working Advice
u Always follow the safety advice provided.
Selecting the saw blade
Use only saw blades suitable for the material being worked.
An overview of recommended saw blades can be found at
the end of these operating instructions. Do not use other
blades than recommended.
Use a narrow saw blade when sawing tight curves.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one’s
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
Provide for good ventilation of the working place.
It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
u Avoid dust accumulation at the workplace. Dust can
easily ignite.
Troubleshooting
Sabre saw
Problem Possible Cause Corrective Measure
Power tool fails to op-
erate
Battery discharged Recharge battery; also see “Battery Charging”
Power tool defective Contact Service Agent.
Internal wiring of garden tool defective Contact Service Agent.
Power tool functions
intermittently
On/Off switch defective Contact Service Agent.
Excessive vibrations/
noise
Power tool defective Contact Service Agent.
Sawing time per bat-
tery charge too low
Blade holder area needs cleaning Hold the tool to point to the ground and start to
operate
Saw blade worn Change saw blade
Poor sawing technique see "Working Advice"
Battery not fully charged Recharge battery; also see “Battery Charging”
The saw blade is run-
ning slow
Battery is getting discharged Recharge battery; also see “Battery Charging”
Overloaded during operation Reduce pressing force of tool against branch
F 016 L94 166 | (15.12.2021) Bosch Power Tools

Содержание

Похожие устройства

Скачать