Caso LX20 3294 [6/54] Operation

4.3 Operation

4.3.1 Weighing

Place the scale on a hard & flat surface. Press on the scale to activate it, the display will

show “0”. Place the food on the scale surface and the weight of the food will appear on

the display.

4.3.2 Tare Function

Place an empty container on the scale. The LED display will now show the weight of the

container.

Press the button on the right side of the scale and the LED shows zero “0”

and clears the weight of container.

Next put the food into the container on the scale. The weight of the food only will appear

on the display. Remove the food and the container and the scale will show the negative

weight. Press the button again and the LED shows zero again after round

about 2 seconds.

4.3.3 Hold-Function

Switch the switch for hold-function on the back of the device to position II. The

hold-function is activated. For example: Place 500 g object on the scale. When

you remove the object the 500 g is still displayed. If you want to weigh a new

object, you must first press . The function can be deactivated via the

switch on the back of the scale by setting the switch to I. Place the item to be weighed on

the weighing surface and the corresponding weight will be displayed.

4.3.4 Change of measurement units

Press to change between g/kg/oz/lb/ml/fl.oz.

4.3.5 Switching off

The scale turns off when you press for at least 5 seconds.

Without any operation the scale will automatically turn off after a little over a minute.

4.3.6 Over Load Indicator

When the scale is overloaded the display will show the error code “EEEE“