Kuppersberg EGS 600 [41/76] Connecting the hob to the mains power supply

Kuppersberg EGS 600 [41/76] Connecting the hob to the mains power supply
41
ENGLISH TECHNICAL PASSPORT
Gas- electric hob
CONNECTING THE HOB TO THE MAINS POWER SUPPLY
This hob must be connected to the
mains power supply only by a suitably
qualied person.
Before connecting the hob to the
mains power supply, check that:
1. the domestic wiring system is
suitable for the power drawn by the hob.
2. the voltage corresponds to the
value given in the rating plate
3. the power supply cable sections
can withstand the load specied on the
rating plate.
To connect the hob to the mains
power supply, do not use adapters,
reducers, or branching devices, as they
can cause overheating and re.
The power supply cable must
not touch any hot parts and must be
positioned so that its temperature will
not exceed 75˚C at any point.
Check with an electrician whether
the domestic wiring system is suitable
without alterations. Any alterations must
only be made by a qualied electrician.
*
 If the cable is damaged or to
be replaced, the operation must be
carried out the by after-sale agent with
dedicated tools to avoid any accidents.
 If the appliance is being
connected directly to the mains an
omnipolar circuit-breaker must be
installed with a minimum opening of
3mm between contacts.
 The installer must ensure that
the correct electrical connection has
been made and that it is compliant with
safety regulations.
 The cable must not be bent or
compressed.
 The cable must be checked
regularly and replaced by authorised
technicians only.

Содержание

Похожие устройства

Скачать