Scarlett SC-CM33022 [5/12] Www scarlett ru sc cm33022 5

Scarlett SC-CM33022 [5/12] Www scarlett ru sc cm33022 5
IM023
www.scarlett.ru SC-CM33022
5
Plug the power cord into an outlet.
TURNING ON THE DEVICE
Press the ONN/OFF button on the control panel to turn on the device.
During operation, the indicator of this button will light up. The operation indicator of the device will blink until the device
heats up the water. When the ONN/OFF indicator stops flashing, it means that the water has heated up and the device
is ready for operation. During the operation of the device, the ONN/OFF indicator lights continuously.
The device is equipped with an auto-off function. When the device is turned on, the ONN/OFF button indicator will light
for 25 minutes, then the device will turn off. Press the ONN/OFF button again to turn on the device.
After the preheating is completed, press the coffee preparation button for 1 cup or 2 cups , the process
of making a coffee drink will begin, the coffee preparation time for 1 cup is 15 seconds, and coffee for 2 cups is 30
seconds.
During the preparation of a coffee drink, the indicator of the portion you have selected will light up.
If you want to get the amount of coffee you need, press and hold the "1 cup " for 3 seconds - the "1 cup" button
flashes, switching to the setting mode. Press the "1 cup" button again to start serving coffee, after the specified time
has elapsed, press the "1 cup" button to complete the time setting that the appliance can remember.
The duration of preparation of 1 cup of coffee can be set to 45 seconds, if the duration of preparation of 1 cup of coffee
is set, the duration of preparation of 2 cups of coffee will be automatically increased by 2 times compared to the
duration of preparation of 1 cup of coffee.
The duration of coffee preparation for 2 cups can be set to 90 seconds, if the duration of coffee preparation for 2 cups
is set, the duration of coffee preparation for 1 cup will be automatically reduced to half of the duration of coffee
preparation for 2 cups
STEAM FUNCTION
When the ONN/OFF indicator is on on the control panel, pour into a separate mug the amount of milk necessary for
making foam, but not more than half of the mug. The mug should be large enough, because after the completion of
the milk whipping cycle, the internal volume of milk will increase.
Press the button . Wait until the steam supply indicator stops flashing, this means the end of warming up.
Place the mug under the cappuccino machine.
ATTENTION! You can not use the cappuccino maker and turn on the steam generation mode without immersing the
cappuccino maker in milk or water, steam coming out of the cappuccino maker nozzle can burn your hand.
Turn the mode switch located on the side of the device from position to position .
The cappuccino maker will start to emit steam and the outgoing steam will start to foam the milk. To improve the effect,
move the mug up and down. Use only chilled milk.
NOTE! If it is necessary to stop the process of steam formation (if you understand that the temperature of the milk is
acceptable for you, and the milk foam is quite lush), turn the mode switch from position to position .
In order to completely exit the steam generation mode, turn the mode switch from position to position ,
press the button on the control panel.
NOTE! It is recommended to wipe the cappuccino machine with a damp cloth to remove milk residues after each
cooking cycle so that the milk does not dry out inside.
CLEANING AND MAINTENANCE
Do not forget to unplug the appliance from the power supply before cleaning.
Let the appliance cool down, and then wipe outside with a soft dry cloth. Do not use detergent or abrasives.
Wash all detachable parts with hot soapy water, then rinse and dry before fitting to place.
DESCALING
Regularly descale the coffee maker.
To remove scale, use 2-3% citric acid solution or special products that can be purchased in the store, and strictly follow
the instructions on their packaging.
Perform cleaning at least once every 2-3 months and when using" hard» water more often.
1. Fill the tank with water or descaling agent no higher than the maximum mark.
2. Install the filter handle as described in the instructions above.
3. Place one cup under the coffee feedholes and the other under the steam pipe.
4. Press the ONN/OFF button on the control panel to turn on the device, select the "2 cups" portion, the solution will start
flowing from the horn into the mug during the previously set time. The cycle should be repeated 2-3 times.
5. To clean the cappuccino machine: remove the handle from the cappuccino machine and place a suitable vessel under
it. Wait until the foaming readiness indicator lights up, then turn on the steam supply, approximately for
2 minutes. Then turn off the steam supply and turn off the coffee maker. Allow the coffee maker to cool for about 10 to 15
minutes.
STORAGE
Complete all requirements of chapter CLEANING AND MAINTENANCE.
Store the appliance in a cool, dry place.
Скачать