Scarlett SC-CM33022 [6/12] Www scarlett ru sc cm33022 6

Scarlett SC-CM33022 [6/12] Www scarlett ru sc cm33022 6
IM023
www.scarlett.ru SC-CM33022
6
TROUBLE SHOOTING
Anomaly
Possible cause
Solutions
No coffee runs through.
Fill reservoir with water.
Press down on the water reservoir
to ensure
it is correctly positioned.
Ensure the operating dial is in the
brewing
position.
See“Care and
Clean”and“Descaling”
Empty out the lter and rinse under
water to
clean. Wipe the group head with a
cloth.
Repack the lter and tamp down
coee lightly
with compactor.
Coee runs down the side of the lter
handle
Filter handle not attached correctly, or
has not been tightened suciently.
Edge of lter insert is not free of
coee granules.
The group head is dirty.
The group head is defective.
Group head silicone seal is
damaged, or warn.
Ensure the handle is rmly positioned
onto the group head.
Clean around the top and bottom
edge of the lter and wipe the group
head clean of coee. 3.Wipe group
head with a damp cloth.
Contact your repair center.
Contact your repair center.
Coee pours out in drops.
Coee grind is too ne or are too
compacted.
Machine blocked by scale build up.
Ensure you are using an evenly
ground coee and do not compact the
grounds so rmly.
Conduct descaling.
Espresso does not have any
Crema.
Coee is old or dry.
Coee not compacted rmly
enough.
Use fresh coee and once you open
the coee be sure to store it in an
airtight container.
Compact coee grounds more rmly.
Espresso does not have any Crema.
Coffee too coarse.
Grind the coee to a ner texture or
change brands of espresso coee to
a ner grind.
Handle comes o during group.
Coee tamped too hard.
Coee grind is too ne.
Filter handle is not attached
correctly, or has not been
tightened suciently.
Top/bottom edge of lter is not
free of coee granules.
The group head is dirty.
The group head is defective.
Group head silicone seal is
warn or damaged.
Tamp the coee grounds lighter.
Change to a coarser grind of coee.
Ensure the handle is rmly positioned
onto
the group head.
Clean around the edge of the lter
and wipe
the group head clean of coee.
Wipe group head with a damp cloth.
Contact your service center.
Contact your service center.
The symbol on the unit, packing materials and/or documentations means used electrical and electronic units and
should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving
point.
For additional information about actual system of the garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment
which happens with incorrect using garbage.
Скачать