Centek CT-1959 Инструкция по эксплуатации онлайн [43/52] 810071
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Centek CT-1959 Инструкция по эксплуатации онлайн [43/52] 810071

Centek CT-1959 Инструкция по эксплуатации онлайн [43/52] 810071
42
CONNECTING TO POWER SUPPLY
1. The washing machine should be connected to a properly installed grounded
electric socket protected by an automatic circuit breaker of 16A rating.
For added safety it is recommended to connect the washing machine to a
dedicated lead (socket) assigned in the switchboard and used exclusively to
connect the washing machine, protected by a dedicated differential current
circuit breaker or a combined automatic circuit breaker and ground fault
circuit breaker (GFCI).
The manufacturer will not accept liability for any damage if the machine is
connected to a power supply circuit without a functioning earthing connection
installed in accordance with local regulations.
2. The electric circuit to which the machine is connected should be located in
a easily visible and accessible place, within 1 m to the left or right of the
appliance. Please prevent situations when the power cable can be jammed,
tugged at or trampled upon.
3. Never use extension cables or cluster type power sockets to connect the
appliance. This is critical to avoid loose contacts or contacts with insufficient
area and thus to prevent fires. Never connect the appliance via an external
timer.
4. If the power cable is damaged it shall only be repaired by a properly qualified
technician at a service center.
5. OPERATING THE WASHING MACHINE
ATTENTION
Before doing your laundry ensure that the washing machine is installed properly
in accordance with our instructions.
The appliance has undergone quality acceptance tests at the factory, therefore it
may contain water and show minor traces of test operation.
ATTENTION
In order to eliminate any foreign smells and clean the washing machine before
first use, we recommend running the “Hypoallergenic Wash” at 85 °С without
clothes and detergents.
Do not worry if the smell has not gone completely. There may be the smell
emitted by plastic and rubber components that have become very hot during
operation.
In this case either run another washing cycle without clothes at a high
temperature, or wait for the smell to disappear after the first two or three
washing cycles.
BEFORE WASHING
MAX MAX
1. Connect the machine to power supply.
2. Open the valve to which the water supply tube is connected.
3. Load the clothes into the machine.
4. Firmly close the door.
5. Add the detergent.
WASHING
1. Select the desired washing program with the selector dial.
2. You can change the washing temperature and drying speed if desired. Please
pay attention to the care instructions tags on the clothes before loading them
into the machine.
3. Select the auxiliary modes and/or functions.
4. Press the «Start/Pause» to start the washing program.
AFTER WASHING
At the end of the washing cycle the word «End» will appear on the display. Wait
for the door to unlock (the lock indicator will go out), open the door and remove
the clothes.
Turn the machine off. Close the water supply valve.
NOTE: We recommend leaving the washing machine door open to allow the
moisture inside to evaporate.
5.1. PREPARING YOUR LAUNDRY
Sort your clothes to achieve optimal washing results, then prepare them in
accordance with the symbols on the washing instruction labels.
SORTING (Fig. 2)
– For more efficient washing sort your laundry in accordance with the care
instructions, fabric type and recommended washing temperature; wash your
laundry at the proper drum rotation speed.
– Different fabrics should be washed at different temperatures and drum
rotation speeds.
– By all means sort dark clothes out from light-colored and white clothes. Wash
them separately, as dyes and pile can migrate and discolor light-colored and
white clothes. If possible, do not wash heavily contaminated clothes together
with cleaner clothes.

Содержание

Похожие устройства

Скачать