Gigabyte GA-HA65M-D2H-B3 (REV. 1.0) — установка драйверов для Windows XP с USB диска [86/104]

Превью страниц Страница 86 / 104

Appendix - 86 -

BeforeinstallingWindowsXP,connectaUSBoppydiskdrivetoyourcomputer.Refertothefollowingfor

installing the driver during the Windows setup process.

Step 1:

Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the mes-

sage "Press F6 if you need to install a 3rd party SCSI or RAID driver." A screen will then appear asking you to

specify an additional SCSI adapter. Press <S>.

Step 2:

InserttheoppydiskcontainingtheSATARAID/AHCIdriverandpress<Enter>.Selecteitherthe32-bitor

64-bit items depending on whether you want to install the 32-bit or 64-bit version of Windows XP (Figure 3).

Both of the Marvell shared library and Marvell 91xx SATA RAID Controller need to be installed. Below we

assume that you are installing the 32-bit version. First select Marvell shared library for 32bit (install rst)

and press <Enter>. On the next screen, press <S> to return to the screen in Figure 4. Then select Marvell

91xx SATA RAID Controller 32bit Driver and press <Enter>. When both of the two drivers appear on the

conrmationscreen,press<Enter>tocontinuethedriverinstallation.

Step 3:

On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-

ceed with the Windows XP installation.

Figure 3

Windows Setup

  YouhavechosentocongureaSCSIAdapterforusewithWindows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

ENTER=Select F3=Exit

Marvellsharedlibraryfor32bit(installrst)

Marvell 91xx SATA RAID Controller 32bit Driver

Marvellsharedlibraryfor64bit(installrst)

Marvell 91xx SATA RAID Controller 64bit Driver