Gigabyte GA-HA65M-D2H-B3 (REV. 1.0) — установка Windows XP: драйвер SATA RAID/AHCI и инструкции [85/104]

Превью страниц Страница 85 / 104

- 85 - Appendix

B. Installing Windows XP

To install Windows XP, you need to install the SATA RAID/AHCI driver during the OS installation. Without the

driver, the hard drive(s) may not be recognized during the Windows setup process. First, copy the driver from

themotherboarddriverdisktoaoppydisk.Refertothemethodsbelow.

Method A:

• For the Marvell 88SE9172, copyalllesinthe\BootDrv\Marvell\RAIDfoldertoyouroppydisk.

For AHCI mode, depending on whether you want to install the 32- or 64-bit version, copythelesinthe

AHCI\Win32 or AHCI\win64 folder.

Method B:

Steps:

1: Use an alternative system and insert the motherboard driver disk.

2: From your optical drive folder, double click the Menu.exeleintheBootDrv folder. A Command Prompt

window will open similar to that in Figure 2.

3: Insert the blank formatted disk. Select the controller driver by pressing the corresponding letter from the

menu and press <Enter>. For example, from the menu in Figure 2,

• For the Marvell 88SE9172, select 7) Marvell RAID driver. (For AHCI drive(s), select Marvell AHCI

driver.)

Yoursystemwillthenautomaticallycopythedriverlestotheoppydisk.Pressanykeytoexitwhennished.

Figure 2