Tc Electronic TRIPLE-C STEREO [20/31] Envelope mode

ENVELOPE MODE

To select the Envelope mode

• Press the ENVELOPE MODE key in the Spectral Adjust

section.

Input Section

Input Level

Adjusts the Input level of the TRIPLE•C. Play your source

material through the TRIPLE•C and observe the Input

meters in the display. Correct operation level is approx -6

to -3dBs with an occasional peak at 0dB. If the the Input

signal at any time overloads, - reduce the Input level.

Dynamic Section

Threshold (1)

When the signal is above the set Threshold point the

Compressor is activated and the gain of any signal above

the Threshold point is processed according to the Attack

and Release settings.

Envelope Attack Gain (2)

This is the level the signal will be boosted/attenuated to in

0.1ms (fixed response time) when the signal exceeds the

Threshold.

Attack (3)

The Attack time is the time it takes for the Compressor to

reach Threshold level again.

Sustain Period (4)

This is not an adjustable parameter. The signal is sustained

at the Threshold level until the Input signal drops below the

Threshold point (5).

Release (6)

The Release time Defines the time the Compressor

continues to process the signal after the Input signal has

dropped below Threshold.

Envelope Release Gain

This is the gain applied to the signal after the signal has

dropped below the Threshold point. This can be used e.g.

to manipulate the sustain of the signal.

Peak Type

Peak Type is not available in the Envelope mode.

Envelope mode is a special feature of the TRIPLE•C that lets you control the entire compression process in detail allowing full

control from the point where the Compressor starts modifying the signal until it releases its grip again.