Scarlett IS 500 [4/19] Care and cleaning

Scarlett IS 500 [4/19] Care and cleaning
4
GB
INSTRUCTION MANUAL
5
GB
INSTRUCTION MANUAL
1. IMPORTANT SAFEGUARDS
Please read these operating instructions carefully before
connecting your kettle to the power supply in order to
avoid damage due to incorrect use.
Before first switching on check that the voltage indicated
on the rating label corresponds to the mains voltage in
your house.
Incorrect operation and improper handling can lead to
malfunction of the appliance and injuries to the user.
For home use only. Do not use for industrial purposes.
Always unplug the appliance from the power supply
when not in use.
Keep the base unit away from water and protect from
splashes.
Do not immerse the unit, cord or plug in water or other
liquids. If it has happened, remove the plug from the
wall socket immediately, an expert should check the unit
before using it again.
Do not operate the appliance if the cord or the plug
is damaged or if the appliance has been otherwise
damaged. In such cases take the appliance to a qualified
specialist for check up and/or repair if necessary.
Ensure that the cord does not hang over sharp edges
and keep it away from hot surfaces.
To disconnect appliance from the power supply pull it
out by the plug only, not by the cord.
Place the appliance on a dry stable non-hot surface,
away from hot objects (e.g. hotplates); do not place
under curtains and shelves.
You should never leave the appliance not supervised
during use.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliances by a
person responsible for their safety
Children should be supervised to ensure that they do
not play with the appliance.
Use the kettle only with the base unit supplied, and do
not use the base unit for any other purposes.
Never take the kettle off from its base unit while in
operation. Switch the appliance off first.
Close the lid properly before switching on. Otherwise,
the appliance will not switch off automatically and the
hot water may overflow.
The kettle is for heating water only, not for any other
purposes and liquids.
2. BEFORE USING FOR THE FIRST TIME
Remove all packing materials and sticker from the kettle.
Place the filter.
Fill the kettle with cool water up to the maximum level mark
and boil it. Empty the kettle. Repeat this operation. The
appliance is ready for use.
3. INSTRUCTION FOR USE
3.1. FILTER PLACING
Open the lid by pressing the lid release button.
Place the filter between two grooves near the spout at
the front of the kettle.
Ensure that the filter is pressed properly down to the
bottom of the grooves, and then close the lid.
3.2. FILLING
Remove the kettle from the base unit.
You can fill the kettle with water via the spout or neck
with opened lid.
Do not fill with less than 0.25 l of water (less than “MIN”
mark) to prevent the kettle from operating dry and more
than 1.7 l (up to “MAX” mark) to avoid overfilling and
water spilling out during the boiling.
3.3. SWITCHING ON
After filling with water, place the kettle on the base unit.
Connect the plug to the power supply and push the On/
Off switch. The appliance will start to operate and the
indicator will light.
3.4. SWITCHING OFF
When water begins to boil, the kettle will switch off
automatically and the indicator light will go off.
This appliance has a safety system, which
automatically switches off heating element if the
appliance inadvertently has been switched on
when empty, or if it operates dry. In this case let
the appliance cool down for 10 minutes before
filling it with water again
3.5. SWITCHING ON AGAIN
The kettle can be switched on again after cooling during
15-20 seconds after the switching off automatically.
4. CARE AND CLEANING
Remove the plug from the socket and let the appliance
cool down completely.
Open the lid and pour out the water.
Clean the outside of the kettle and the base unit with a
soft damp cloth, then wipe with a dry cloth. Do not use
any abrasive materials.
Remove scale regularly using special descaling agents
available at the market.
4.1. FILTER CLEANING
Remove the filter out of the kettle.
Place it under a jet of water and rub gently any remaining
elements with a soft brush (not included).
Return the filter back to its place.
5. STORAGE
The cord could be winded into a cord storage
compartment provided in the base unit.
Switch the appliance off, unplug it, and let it cool.
Complete all requirements of CLEANING AND CARE section.
Keep the appliance in a dry cool place.

Содержание

Скачать