Suzuki GSX-R600 (1996-2000) [10/429] Brake fluid

Содержание

GENERAL INFORMATION 1 4 ENGINE OIL For U S A model SUZUKI recommends the use of SUZUKI PERFORMANCE 4 MOTOR OIL or an oil which is rated SF or SG under the API American Petroleum Institute service classification The recommended viscosity is SAE 10W 40 If an SAE 10W 40 oil is not available select an alternative according to the right chart ENGINE OIL For the other models Use a premium quality 4 stroke motor oil to ensure longer service life of your motorcycle Use only oils which are rat ed SF or SG under the API service classification The recom mended viscosity is SAE 10W 40 If an SAE 10W 40 motor oil is not available select an alternative according to the right chart BRAKE FLUID Specification and classification DOT 4 A WARNING Since the brake system of this motorcycle is filled with a glycol based brake fluid by the manufac turer do not use or mix different types of fluid such as silicone based and petroleum based fluid for refilling the system otherwise serious damage will result Do not use any brake fluid taken from old or used or unsealed containers Never re use brake fluid left over from a previous servicing which has been stored for a long period FRONT FORK OIL Use fork oil 10 ENGINE COOLANT Use an anti freeze engine coolant compatible with an aluminum radiator mixed with distilled water only WATER FOR MIXING Use distilled water only Water other than distilled water can corrode and clog the aluminum radiator ANTI FREEZE ENGINE COOLANT The engine coolant perform as a corrosion and rust inhabit as well as anti freeze Therefore the en gine coolant should be used at all times even though the atmospheric temperature in your area does not go down to freezing point LIQUID AMOUNT OF WATER ENGINE COOLANT Solution capacity total 2 550 ml 2 7 2 2 US Imp qt For engine coolant mixture information refer to cooling system section page 5 4 A CAUTION Mixing of anti freeze engine coolant should be limited to 60 Mixing beyond it would reduce its efficiency If the anti freeze engine coolant mixing ratio is below 50 rust inhabiting per formance is greatly reduced Be sure to mix it above 50 even though the atmospheric tem perature does not go down to the freezing point