Konica Minolta EP2130 [38/62] Troubleshooting tips

Содержание

30 4 3 Should A Light Up When lAj is shown on the control panel it indicates that toner is running out At this time replace the Toner Cartridge by following the procedure given below TROUBLESHOOTING TIPS 1 Swing down the Front Cover swing out the Cartridge Holder of the Imaging Unit and remove the old Toner Cartridge The Cartrige can be removed where the line marker on its outside is aligned with the upper edge of the Cartrige Holder If the Cartridge cannot be removed rotate it slightly clockwise or counterclockwise Hold the Toner Cartridge so that its tab is on the upper side shake it well gently peel the mylar seal off just enough to allow any air pressure to be released then remove the remainder of seal Once the seal has been removed hold the Cartridge so that its Toner Port faces up 1133U042 1 Caution Toner may be under pressure in the cartridge Failure to gently peel off the mylar seal may cause toner to discharge 11320043 3 Align the tab on the Toner Cartridge with the notch in the Cartridge Holder and slide the Cartridge into position 4 Swing the Cartridge Holder into its locked position and close the Front Cover

Скачать