Suunto HelO2 — настройка и активация режима погружения для дайвинга [22/64]

Превью страниц Страница 22 / 64

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

SELECT TANK

PRESSURE ON.

5.9.9. Setting the units

Use Unit Settings to choose between metric (meters/celsius/bar) and imperial

(feet/fahrenheit/psi) units.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.10. Activation and pre-checks

This section describes how to activate the DIVE mode and explains the pre-checks that

it is highly recommended you perform before you get into the water.

5.10.1. Accessing DIVE mode

The Suunto HelO

has two diving modes: MIXED GAS mode for diving with gas mixes

and GAUGE mode for use as a bottom timer.

The chosen dive mode is displayed when the DIVE mode is accessed, and you can toggle

between the submodes by pressing the UP/DOWN buttons.

5.10.2. DIVE mode activation

The dive computer activates automatically when submerged deeper than 0.5 m/1.5 ft.

However, it is necessary to activate the DIVE mode BEFORE diving to check the

altitude and personal adjustment settings, battery condition, oxygen settings etc.

After activation, all graphical display elements are turned on, and the backlight and the

beep are activated. A few seconds later the battery power indicator is shown.

At this time, perform your pre-checks, making sure that:

•

the instrument operates in the correct mode and provides a complete display (MIXED

GAS/GAUGE mode)

•

the battery level is ok