Suunto HelO2 [36/64] Dive numbering shown during dive planning

By pressing the UP/DOWN buttons, you can scroll the no-decompression limits in 3 m/10

ft increments ending at 45 m/150 ft. No-decompression limits longer than 99min are dis-

played as “—“.

WHEN ENTERING THE PLANNODEC MODE THE DISPLAY FIRST BRIEFLY

SHOWS THE REMAINING DESATURATION TIME BEFORE GOING INTO PLAN MODE. USE UP

AND DOWN BUTTONS TO SCROLL DIFFERENT NO-DECOMPRESSION LIMITS.

NO-DECOMPRESSION LIMITS LONGER THAN 99 MINUTES ARE DISPLAYED AS “–”.

The Planning mode takes into account the following information from previous dives:

•

any calculated residual inert gas

•

all dive history for the past four days

The no-decompression times given for different depths will therefore be shorter than before

your first “fresh” dive.

You can exit the planning mode by pressing the MODE button.

NOTE

The Planning mode is disabled in GAUGE mode and in Error mode

(see Section 5.7. Error conditions). The planning mode calculates no-

decompression times for MIX1 only. If an additional mix is enabled

in the MIXED GAS mode, it does not affect the calculations in

PLANNoDec mode.

Higher Altitude and conservative Personal Adjustment settings will shorten the no-decom-

pression time limits. These limits at different Altitude and Personal Adjustment setting

selections are explained in Section 5.10.4. Diving at altitude and in Section 5.10.5. Personal

adjustments

Dive numbering shown during dive planning

Dives belong to the same repetitive dive series if the instrument was still counting down

the no-fly time at the beginning of the dive.

The surface interval must be at least 5 minutes for a dive to be considered a repetitive

dive. Otherwise, it is considered a continuation of the same dive. The dive number will not

change and the dive time will continue where it left off. (See also Section 7.2. Dive num-

bering ).

7.6. MEMORY mode

The memory options include a dive logbook (MEMLogbook) and dive history (MEMHistory).