Suunto D9 [46/122] Dive mode settings

5.2. DIVE MODE SETTINGS

This D9 has several User Deﬁ nable Functions and depth and

time related alarms that you can set according to your perso-

nal preference. The dive mode settings are dependent on the

DIVE sub-mode chosen (Air, EAN, Gauge), so that e.g. nitrox

settings are only available in the DIVEean sub-mode.

To enter dive mode settings (Fig. 5.7) press the DOWN but-

ton for >2s when in DIVE mode. Then use the UP/DOWN

but-

tons to toggle settings. Press SELECT

to review/change set-

tings. Use SELECT to move between values and UP/DOWN

to alter the value. Exit using MODE.

NOTE! The settings cannot be activated until 5 minutes has

elapsed after the dive.

5.2.1. DEPTH ALARM

You can set one depth alarm in the dive computer (Fig 5.8).

The depth alarm is set to 40 m [131 ft] at the factory, but you

are able to adjust it according your personal preference or

switch it off. The depth range can be set from 3.0 m to 100 m

[9 ft to 328 ft] (Fig. 5.9.).

Fig. 5.15. Entering Personal

and Altitude settings.

Fig. 5.16. Setting Perso-

nal and Altitude adjust-

ment. Press scroll buttons

to change personal mode.

Use SELECT to accept.