Suunto D9 [54/122] If the dive is started without that the d9 and the transmitter have been properly paired the d9 will indicate that no cylinder data is available by displaying off fig 5 0e

If the dive is started without that the D9 and the transmitter have been properly paired,

the D9 will indicate that no cylinder data is available by displaying “OFF” (Fig. 5.30e).

TABLE 5.3. PRESSURE TRANSMISSION RELATED DISPLAYS

Display Indication Figure 5.30

Cd:-- Set Code. No code stored, wrist unit ready for pairing a

with tranmitter.

- - - Pressure reading over 360 bar [5220 psi] b

FAIL Indicates pressure reading has not been updated in more than c

1 minute. Transmitter is out of range, in power saving mode or

on another channel. Activate the transmitter by breathing off the

regulator, and recode the wrist unit if necessary.

LOBT Indicates pressure transmitter battery voltage is low. d

Change the transmitter battery!

OFF Pairing has not been conducted before start of dive. e

No cylinder data available.