Suunto D9 — инструкция по подключению и настройке регулятора для дайвинга [51/122]

Превью страниц Страница 51 / 122

ftlbs or 53 inlbs). Sealing is based on a static o-ring,

not force!

3. Attach the regulator to the scuba cylinder. Slowly

open the valve. Check for leaks by submerging the

regulator ﬁ rst stage in water. If leaks are detected,

check the condition of the o-ring and sealing surfa-

ces.

5.3.2. PAIRING AND CODE SELECTION

In order to receive wireless data the transmitter and the D9

wrist unit need to be paired. During the pairing procedure the

transmitter and wrist unit select a common transmission co-

de.

The transmitter turns on when the pressure exceeds 15bar

[218 psi] and it then starts sending pressure data together

with a code number. During the pairing procedure the D9 sto-

res the above mentioned code number and starts displaying

pressure values that are received with that code. This coding

procedure inhibits data mix up from other divers also using

the D9’s transmitter.

When there is no stored code the D9 will display “cd:--” and

receive with lowered sensitivity from a very short distance on-

ly (Fig. 5.30 a). By taking the D9 close to the transmitter it will

Fig. 5.26 Setting Metric/

Imperial units.

Fig. 5.27. Entering HP

Code settings