Kramer TP-45RC [15/22] Connecting the system in component video mode

Connecting a Component/XGA – Audio Distribution System

5.2 Connecting the System in Component Video Mode

To configure a TP-45/ TP-45RC/TP-46 Component/XGA – Audio

distribution system

in the component video mode, as the example in

Figure 7

illustrates, do the following:

1. On the TP-45 or TP-45RC, connect the following:

• A component video source (for example, a DVD player) to the

Y, Cb/Pb, Cr/Pr RCA connectors

• A digital audio source to the S/PDIF RCA connector

2. If necessary, set the HS and VS switches

, on the TP-45 underside.

3. On the TP-45, use the SELECT buttons as follows:

• Release the video SELECT button to choose the component

video input

• Press the audio SELECT button to choose S/PDIF

• Release the audio SELECT button to choose analog audio

4. On the TP-45RC, use the SELECT buttons as follows:

• Momentarily press the VIDEO SELECT button. The UXGA

LED turns off when the component video input is selected

• Momentarily press the AUDIO SELECT button to toggle

between the S/PDIF

and analog audio inputs

5. On the TP-46, connect the following:

• The Y, C

B/PB, CR/PR RCA connectors to a component video

acceptor (for example, a plasma display)

• The S/PDIF RCA connector

to the digital audio acceptor (for

example, the audio input on the plasma display)

6. Connect the LINE OUTPUT RJ-45 connector on the TP-45/TP-45RC to

the LINE IN RJ-45 connector on the TP-46, via twisted pair cabling, see

section 5.4

7. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity on both

the TP-45/TP-45RC and the

1 Using up to 300ft (100m) of UTP cabling

2 Alternatively, you can connect an analog audio source

3 By default, both switches are set down (for normal V SYNC and H SYNC polarity)

4 The analog audio LED lights when analog audio is selected

5 Alternatively, you can connect an analog audio acceptor, or you can connect both

6 If you cannot connect the power to both the TP-45 and TP-46, connect it to the TP-46 only. If more than one TP-46 is

connected, connect the power to each TP-46 unit