Kramer TP-45RC [5/22] Overview

Overview

3 Overview

The TP-45/TP-45RC and TP-46 are a twisted pair transmitter and receiver

for component video (YUV) or computer graphics video and unbalanced

stereo audio or S/PDIF audio signals. The TP-45/TP-45RC transmitter

converts audio and video to a twisted pair signal and the TP-46 converts the

twisted pair signal back into audio and video signals.

The TP-45 and TP-45RC have two SELECT buttons that let you choose

the video signal input (XGA

or component) as well as the audio input

(digital or analog signal). By selecting the required video input signal, the

TP-45 or TP-45RC with the TP-46 can constitute either a component video

(Y, C

B/PB, CR/PR) or an XGA video – audio transmitter / receiver system

• If XGA is selected, the TP-45 or TP-45RC receives an XGA signal

and transmits it over the twisted pair cable to the XGA output on the

TP-46 receiver

• If component video is selected, the component video signal

transmitted over the twisted pair cable to the COMP outputs on the

TP-46 receiver

• The analog audio or S/PDIF (digital audio)—as selected via the audio

SELECT button—is transmitted together with the video signal over the

twisted pair cable to the TP-46 receiver

• The TP-45RC can execute these control functions also remotely using

simple pushbuttons

The audio signal is distributed simultaneously to the analog or digital audio

outputs.

Additional TP-46 units can be connected via the TP-46 LINE OUT twisted

pair connector, to extend the range of the output signals

The TP-45 Component/XGA – Audio Transmitter features:

• Transmission range of more than 300ft (more than 100m)

• YUV

input on 3 RCA connectors and a computer graphics input on a

15-pin HD (F) connector

1 The term XGA used throughout this manual implies resolutions exceeding UXGA

2 The TP-45/TP-45RC and TP-46 do not convert the video signal format. Thus computer graphics sources must be routed to

computer graphics outputs. Similarly, component video sources must be routed to component video outputs

3 And audio signal

4 You can connect up to three additional TP-46 units, adding a total cable length of up to 300 meters. The video quality may

be reduced if further units are connected

5 Also known as Y, Cb, Cr, or Y, B-Y, R-Y, or Y, Pb, Pr