![ASRock 960GM/U3S3 FX [40/56] Bios setup utility](/img/pdf.png)
ASRock 960GM/U3S3 FX [40/56] Bios setup utility
![ASRock 960GM/U3S3 FX [40/56] Bios setup utility](/views2/1159611/page40/bg28.png)
4040
4040
40
AMD Turbo Core Technology
This item appears only when the processor you adopt supports this feature.
Use this to select enable or disable AMD Turbo Core Technology. Confi guration
options: [Auto] and [Disabled]. The default value is [Auto].
AMD IO C-State Support
This allows you to enable or disable AMD IO C-State Support. The default
value is [Enabled].
AMD APM
Application Power Management (APM) allows the processor to deterministi-
cally provide maximum performance while remaining within the specified power
delivery and removal envelope. APM dynamically monitors core activity and
generates an approximation of power consumption.When manually adjust the
CPU Multiplier/Voltage, APM status will automatically be set to disable. APM
is capable of being manually set enable if users still need this function. The
default value is [Auto].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
BIOS SETUP UTILITY
Main
Advanced H/W Monitor Boot Security Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
EZ Overclocking
CPU Configuration
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
Spread Spectrum
Boot Failure Guard
AMD APM
Boot Failure Guard Count
CPU Active Core Control
AMD Turbo Core Technology
AMD IO C-State Support
Processor Maximum Frequency
North Bridge Maximum Frequency
x31.5 6300 MHZ
x31.0 6200 MHz
[Auto]
[Enabled]
[3]
[All Cores]
[Auto]
[Enabled]
[Auto]
Multiplier/Voltage Change
[Manual]
Load Optimized CPU OC Setting [Press Enter]
Load Optimized mGPU OC Setting [Press Enter]
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
CPU Voltage
It allows you to adjust the value of CPU voltage. However, for safety and sys-
tem stability, it is not recommended to adjust the value of this item.
Содержание
- Gm u3s3 fx 1
- User manual 1
- Copyright notice copyright notice copyright notice copyright notice copyright notice 2
- Disclaimer disclaimer disclaimer disclaimer disclaimer 2
- 1 1 1 1 introduction introduction introduction introduction introduction 5 5 5 5 5 3
- 2 2 2 2 installation installation installation installation installation 14 14 14 14 14 3
- Contents contents contents contents contents 3
- 1 1 1 1 introduction introduction introduction introduction introduction 5
- 1 1 1 1 pppppack ack ack ack ackage contents age contents age contents age contents age contents 5
- 1 1 1 1 specifications specifications specifications specifications specifications 6
- Caution 9
- 10 10 10 10 10
- 11 11 11 11 11
- 12 12 12 12 12
- Amd 760g chipset 12
- Motherboard layout 1 motherboard layout 1 motherboard layout 1 motherboard layout 1 motherboard layout 12
- 13 13 13 13 13
- 8 9 10 11 13
- I o p 1 i o p 1 i o p 1 i o p 1 i o panel anel anel anel anel 13
- Lan port led indications 13
- Off no activity off 10mbps connection blinking data activity orange 100mbps connection green 1gbps connection 13
- 14 14 14 14 14
- 2 2 2 2 installation installation installation installation installation 14
- Pre installation precautions pre installation precautions pre installation precautions pre installation precautions pre installation precautions 14
- 15 15 15 15 15
- 2 2 2 2 cpu installation cpu installation cpu installation cpu installation cpu installation 15
- 2 2 2 2 installation of cpu fan and heatsink installation of cpu fan and heatsink installation of cpu fan and heatsink installation of cpu fan and heatsink installation of cpu fan and heatsink 15
- 16 16 16 16 16
- Installation of memor 2 installation of memor 2 installation of memor 2 installation of memor 2 installation of memory modules dimm y modules dimm y modules dimm y modules dimm y modules dimm 16
- Installing a dimm installing a dimm installing a dimm installing a dimm installing a dimm 16
- 17 17 17 17 17
- Expansion slots pci and pci express slots 2 expansion slots pci and pci express slots 2 expansion slots pci and pci express slots 2 expansion slots pci and pci express slots 2 expansion slots pci and pci express slots 17
- Installing an expansion card installing an expansion card installing an expansion card installing an expansion card installing an expansion card 17
- 18 18 18 18 18
- Dual monitor and surround display features 2 dual monitor and surround display features 2 dual monitor and surround display features 2 dual monitor and surround display features 2 dual monitor and surround display features 18
- 19 19 19 19 19
- 20 20 20 20 20
- 2 2 2 2 asrock smart remote installation guide asrock smart remote installation guide asrock smart remote installation guide asrock smart remote installation guide asrock smart remote installation guide 21
- 21 21 21 21 21
- 2 2 2 2 jumpers setup jumpers setup jumpers setup jumpers setup jumpers setup 22
- 22 22 22 22 22
- 23 23 23 23 23
- Onboard headers and connectors 2 onboard headers and connectors 2 onboard headers and connectors 2 onboard headers and connectors 2 onboard headers and connectors 23
- 24 24 24 24 24
- 25 25 25 25 25
- Cable to this connector and 25
- Chassis and power fan connectors please connect the fan cables 25
- Chassis speaker header please connect the chassis 25
- Cpu fan connector please connect the cpu fan 25
- Functions 25
- Match the black wire to the 25
- Match the black wire to the ground pin 25
- Several system front panel 25
- Speaker to this header 25
- System panel header this header accommodates 25
- To the fan connectors and 25
- 24 pin atxpwr1 26
- 26 26 26 26 26
- 4 pin atx12v1 26
- 9 pin com1 26
- Atx 12v power connector please connect an atx 12v 26
- Atx power connector please connect an atx power 26
- Pin 1 3 connected 26
- Pin atx power supply installation 26
- Pin fan installation 26
- Power supply to this connector 26
- See p 2 no 1 26
- See p 2 no 29 26
- See p 2 no 6 26
- Serial port header this com1 header supports a 26
- Serial port module 26
- Supply to this connector 26
- Though this motherboard provides 24 pin atx power connector it can still work if you adopt a traditional 20 pin atx power supply to use the 20 pin atx power supply please plug your power supply along with pin 1 and pin 13 26
- Though this motherboard provides 4 pin cpu fan quiet fan support the 3 pin cpu fan still can work successfully even without the fan speed control function if you plan to connect the 3 pin cpu fan to the cpu fan connector on this motherboard please connect it to pin 1 3 26
- 2 2 2 2 sa sa sa sa satttttaii hard disk setup guide aii hard disk setup guide aii hard disk setup guide aii hard disk setup guide aii hard disk setup guide 27
- 27 27 27 27 27
- 30 30 30 30 30
- Caution 30
- Operation guide operation guide operation guide operation guide operation guide 30
- Points of attention before you process the hot plug 30
- Sa 2 4 sa 2 4 sa 2 4 sa 2 4 sattttta sa a sa a sa a sa a satttttaii sa aii sa aii sa aii sa aii sattttta3 hdd hot plug f a3 hdd hot plug f a3 hdd hot plug f a3 hdd hot plug f a3 hdd hot plug feature and eature and eature and eature and eature and 30
- 31 31 31 31 31
- How to hot plug a sata sataii sata3 hdd 31
- How to hot unplug a sata sataii sata3 hdd 31
- Points of attention before you process the hot plug please do follow below instruction sequence to process the hot plug improper procedure will cause the sata sataii sata3 hdd damage and data loss 31
- Points of attention before you process the hot unplug please do follow below instruction sequence to process the hot unplug improper procedure will cause the sata sataii sata3 hdd damage and data loss 31
- 33 33 33 33 33
- 7 64 bit vista 7 7 64 bit vista 7 7 64 bit vista 7 7 64 bit vista 7 7 64 bit vist 33
- Bit with raid functions 64 bit with raid functions 64 bit with raid functions 64 bit with raid functions 64 bit with raid functions 33
- Installing windows 2 6 installing windows 2 6 installing windows 2 6 installing windows 2 6 installing window 33
- Vista vista vista vista vist 33
- 35 35 35 35 35
- 7 64 bit vista 7 7 64 bit vista 7 7 64 bit vista 7 7 64 bit vista 7 7 64 bit vist 35
- Bit without raid functions 64 bit without raid functions 64 bit without raid functions 64 bit without raid functions 64 bit without raid functions 35
- Installing windows 2 7 installing windows 2 7 installing windows 2 7 installing windows 2 7 installing window 35
- Vista vista vista vista vist 35
- 3 3 3 3 bios menu bar bios menu bar bios menu bar bios menu bar bios menu bar 37
- 3 3 3 3 bios setup utility bios setup utility bios setup utility bios setup utility bios setup utility 37
- 37 37 37 37 37
- Introduction 3 introduction 3 introduction 3 introduction 3 introduction 37
- 3 3 3 3 main screen main screen main screen main screen main screen 38
- 3 3 3 3 navigation keys navigation keys navigation keys navigation keys navigation keys 38
- 38 38 38 38 38
- Bios setup utility 38
- Main oc tweaker h w monitor boot security exit advanced 38
- Please check the following table for the function description of each navigation key 38
- System overview 38
- System time hour minute second use this item to specify the system time system date day month date year use this item to specify the system date 38
- To jump to the exit screen or exit the current screen 38
- V02 4 c copyright 1985 2005 american megatrends inc 38
- When you enter the bios setup utility the main screen will appear and display the system overview 38
- 3 3 3 3 oc t oc t oc t oc t oc tweak weak weak weak weaker screen er screen er screen er screen er screen 39
- 39 39 39 39 39
- Bios setup utility 39
- Cpu configuration 39
- Cpu configuration overclock mode use this to select overclock mode the default value is auto configuration options auto and manual cpu frequency mhz use this option to adjust cpu frequency pcie frequency mhz use this option to adjust pcie frequency spread spectrum this item should always be auto for better system stability boot failure guard enable or disable the feature of boot failure guard boot failure guard count enable or disable the feature of boot failure guard count cpu active core control this allows you to adjust cpu active core control feature the configuration options depend on the cpu core you adopt the default value is all cores 39
- Ez overclocking load optimized cpu oc setting you can use this option to load the optiomized cpu overclocking setting please note that overclocking may cause damage to your cpu and motherboard it should be done at your own risk and expense load optimized mgpu oc setting you can use this option to load mgpu overclocking setting please note that overclocing may cause damage to your mgpu and motherboard it should be done at your own risk and expense 39
- In the oc tweaker screen you can set up overclocking features 39
- Main advanced h w monitor boot security exit 39
- Oc tweaker 39
- V02 4 c copyright 1985 2005 american megatrends inc 39
- 40 40 40 40 40
- Amd turbo core technology this item appears only when the processor you adopt supports this feature use this to select enable or disable amd turbo core technology confi guration options auto and disabled the default value is auto amd io c state support this allows you to enable or disable amd io c state support the default value is enabled amd apm application power management apm allows the processor to deterministi cally provide maximum performance while remaining within the specified power delivery and removal envelope apm dynamically monitors core activity and generates an approximation of power consumption when manually adjust the cpu multiplier voltage apm status will automatically be set to disable apm is capable of being manually set enable if users still need this function the default value is auto processor maximum frequency it will display processor maximum frequency for reference north bridge maximum frequency it will display north bridge maximum frequency for reference mult 40
- Bios setup utility 40
- Cpu configuration 40
- Cpu frequency multiplier for safety and system stability it is not recommended to adjust the value of this item cpu voltage it allows you to adjust the value of cpu voltage however for safety and sys tem stability it is not recommended to adjust the value of this item 40
- Main advanced h w monitor boot security exit 40
- Oc tweaker 40
- V02 4 c copyright 1985 2005 american megatrends inc 40
- 41 41 41 41 41
- Bios setup utility 41
- Memory configuration memory clock this item can be set by the code using auto you can set one of the standard values as listed 400mhz ddr3_800 533mhz ddr3_1066 667mhz ddr3_1333 800mhz ddr3_1600 and 933mhz ddr3_1866 dram voltage use this to select dram voltage the default value is auto 41
- Memory timing 41
- Nb frequency multiplier for safety and system stability it is not recommended to adjust the value of this item cpu nb voltage it allows you to adjust the value of cpu nb voltage however for safety and system stability it is not recommended to adjust the value of this item ht bus speed this feature allows you selecting hyper transport bus speed configuration options auto x1 200mhz to x11 2200mhz ht bus width this feature allows you selecting hyper transport bus width configuraion options auto 8 bit and 16 bit 41
- Oc tweaker 41
- Power down enable use this item to enable or disable ddr power down mode bank interleaving interleaving allows memory accesses to be spread out over banks on the same node or accross nodes decreasing access contention channel interleaving it allows you to enable channel memory interleaving the default value is auto 41
- V02 4 c copyright 1985 2003 american megatrends inc 41
- 42 42 42 42 42
- 3 3 3 3 advanced screen advanced screen advanced screen advanced screen advanced screen 43
- 43 43 43 43 43
- Advanced 43
- Advanced settings 43
- Bios setup utility 43
- In this section you may set the configurations for the following items cpu configuration chipset configuration acpi configuration storage configuration pcipnp configuration superio configuration and usb configuration 43
- Instant flash instant flash is a bios flash utility embedded in flash rom this convenient bios update tool allows you to update system bios without entering operat ing systems first like ms dos or window 43
- Just launch this tool and save the new bios file to your usb flash drive floppy disk or hard drive then you can update your bios only in a few clicks without preparing an additional floppy diskette or other complicated flash utility please be noted that the usb flash drive or hard drive must use fat32 16 12 file system if you ex ecute instant flash utility the utility will show the bios files and their respec tive information select the proper bios file to update your bios and reboot your system after bios update process completes 43
- Main oc tweaker h w monitor boot security exit 43
- Setting wrong values in this section may cause the system to malfunction 43
- V02 4 c copyright 1985 2005 american megatrends inc 43
- 3 3 3 3 cpu configuration cpu configuration cpu configuration cpu configuration cpu configuration 44
- 44 44 44 44 44
- Advanced 44
- And want to enable this function please set this item to enabled please note that enabling this function may reduce cpu voltage and memory frequency and lead to system stability or compatibility issue with some memory modules or power supplies please set this item to disable if above issue occurs secure virtual machine when this option is set to enabled a vmm virtual machine architecture can utilize the additional hardware capabilities provided by amd v the default value is enabled configuration options enabled and disabled enhance halt state c1e all processors support the halt state c1 the c1 state is supported through the native processor instructions hlt and mwait and requires no hardware support from the chipset in the c1 power state the processor maintains the context of the system caches cpu thermal throttle use this item to enable cpu internal thermal control mechanism to keep the cpu from overheated the default value is auto 44
- Bios setup utility 44
- Cool n quiet use this item to enable or disable amd s cool n quie 44
- Cpu configuration 44
- Technology the default value is enabled configuration options auto enabled and disabled if you install window 44
- V02 4 c copyright 1985 2003 american megatrends inc 44
- 3 3 3 3 chipset configuration chipset configuration chipset configuration chipset configuration chipset configuration 45
- 45 45 45 45 45
- Advanced 45
- Bios setup utility 45
- Chipset settings 45
- Onboard hd audio select auto enabled or disabled for the onboard hd audio feature if you select auto the onboard hd audio will be disabled when pci sound card is plugged front panel select auto or disabled for the onboard hd audio front panel onboard lan this allows you to enable or disable the onboard lan feature primary graphics adapter this item will switch the pci bus scanning order while searching for video card it allows you to select the type of primary vga in case of multiple video controllers the default value of this feature is pci configuration options pci onboard and pci express internal graphics mode this allows you to adjust internal graphics mode the default value is uma configuration options uma and disabled share memory this allows you to set share memory feature the default value is auto configuration options auto 32mb 64mb 128mb 256mb and 512mb this option only appears when you set internal graphics mode to uma onboard hdmi hd audio this allows you to enable or disab 45
- V02 4 c copyright 1985 2003 american megatrends inc 45
- 3 3 3 3 acpi configuration acpi configuration acpi configuration acpi configuration acpi configuration 46
- 46 46 46 46 46
- Away mode support use this item to enable or disable away mode support under window 46
- Certification 46
- Suspend to ram use this item to select whether to auto detect or disable the suspend to ram feature select auto will enable this feature if the os supports it check ready bit use this item to enable or disable the feature check ready bit 46
- Use this item to enable or disable ring in signals to turn on the system from the power soft off mode pci devices power on use this item to enable or disable pci devices to turn on the system from the power soft off mode ps 2 keyboard power on use this item to enable or disable ps 2 keyboard to turn on the system from the power soft off mode rtc alarm power on use this item to enable or disable rtc real time clock to power on the system acpi hpet table use this item to enable or disable acpi hpet table the default value is disabled please set this option to enabled if you plan to use this motherboard to submit window 46
- Xp media center os the default value is disabled restore on ac power loss this allows you to set the power state after an unexpected ac power loss if power off is selected the ac power remains off when the power recovers if power on is selected the ac power resumes and the system starts to boot up when the power recovers ring in power on 46
- 3 3 3 3 storage configuration storage configuration storage configuration storage configuration storage configuration 47
- 47 47 47 47 47
- Advanced 47
- Bios setup utility 47
- Onboard sata controller use this item to enable or disable the onboard sata controller feature sata operation mode use this item to adjust sata operation mode the default value of this option is ide if you want to operate raid function on sata sata2 hdds please select raid configuration options ide raid and ahci onboard sata3 operation mode use this item to adjust sata3 operation mode the default value of this option is ide mode configuration options ide mode ahci mode and disabled ide device configuration you may set the ide configuration for the device that you specify we will use the ide1 master as the example in the following instruction which can be applied to the configurations of ide1 slave as well 47
- Storage configuration 47
- V02 4 c copyright 1985 2003 american megatrends inc 47
- 48 48 48 48 48
- 3 3 3 3 pcipnp configuration pcipnp configuration pcipnp configuration pcipnp configuration pcipnp configuration 49
- 49 49 49 49 49
- Advanced 49
- Advanced pci pnp settings 49
- Bios setup utility 49
- Pci latency timer the default value is 32 it is recommended to keep the default value unless the installed pci expansion cards specifications require other settings pci ide busmaster use this item to enable or disable the pci ide busmaster feature 49
- Setting wrong values in this section may cause the system to malfunction 49
- V02 4 c copyright 1985 2003 american megatrends inc 49
- 3 3 3 3 super io configuration super io configuration super io configuration super io configuration super io configuration 50
- 50 50 50 50 50
- Advanced 50
- Bios setup utility 50
- Configure super io chipset 50
- Serial port address use this item to set the address for the onboard serial port or disable it configuration options disabled 3f8 irq4 2f8 irq3 3e8 irq4 and 2e8 irq3 infrared port address use this item to set the address for the onboard infrared port or disable it configuration options disabled 3f8 irq4 2f8 irq3 3e8 irq4 and 2e8 irq3 parallel port address use this item to set the address for the onboard parallel port or disable it configuration options disabled 378 and 278 parallel port mode use this item to set the operation mode of the parallel port the default value is ecp epp if this option is set to ecp epp it will show the epp version in the following item epp version configuration options normal bi directional and ecp epp epp version use this item to set the epp version configuration options 1 and 1 ecp mode dma channel use this item to set the ecp mode dma channel configuration options dma0 dma1 and dma3 parallel port irq use this item to set the irq for the parallel port confi 50
- V02 4 c copyright 1985 2003 american megatrends inc 50
- 3 3 3 3 usb configuration usb configuration usb configuration usb configuration usb configuration 51
- 51 51 51 51 51
- Advanced 51
- Bios setup utility 51
- Usb configuration 51
- Usb controller use this item to enable or disable the use of usb controller usb 2 support use this item to enable or disable the usb 2 support legacy usb support use this option to select legacy support for usb devices there are four configuration options enabled auto disabled and bios setup only the default value is enabled please refer to below descriptions for the details of these four options enabled enables support for legacy usb auto enables legacy support if usb devices are connected disabled usb devices are not allowed to use under legacy os and bios setup when disabled is selected if you have usb compatibility issue it is recommended to select disabled to enter os bios setup only usb devices are allowed to use only under bios setup and windows linux os usb 3 controller use this item to enable or disable the use of usb 3 controller usb keyboard remote power on use this item to enable or disable usb keyboard remote power on on the system usb mouse power on use this item to enabl 51
- V02 4 c copyright 1985 2005 american megatrends inc 51
- 3 3 3 3 hardware health event monitoring screen hardware health event monitoring screen hardware health event monitoring screen hardware health event monitoring screen hardware health event monitoring screen 52
- 52 52 52 52 52
- Bios setup utility 52
- Cpu fan setting this allows you to set the cpu fan speed configuration options full on and automatic mode the default is value full on chassis fan 1 setting this allows you to set the chassis fan 1 speed configuration options full on and manual mode the default is value full on 52
- Hardware health event monitoring 52
- In this section it allows you to monitor the status of the hardware on your system including the parameters of the cpu temperature motherboard temperature cpu fan speed chassis fan speed and the critical voltage 52
- Main oc tweaker advanced boot security exit h w monitor 52
- V02 4 c copyright 1985 2003 american megatrends inc 52
- 3 3 3 3 boot screen boot screen boot screen boot screen boot screen 53
- 3 3 3 3 boot settings configuration boot settings configuration boot settings configuration boot settings configuration boot settings configuration 53
- 53 53 53 53 53
- Bios setup utility 53
- Boot settings 53
- Full screen logo use this item to enable or disable oem logo the default value is enabled addon rom display use this option to adjust addon rom display if you enable the option full screen logo but you want to see the addon rom information when the system boots please select enabled configuration options enabled and disabled the default value is enabled boot from onboard lan use this item to enable or disable the boot from onboard lan feature boot up num lock if this item is set to on it will automatically activate the numeric lock function after boot up 53
- In this section it will display the available devices on your system for you to config ure the boot settings and the boot priority 53
- Main oc tweaker advanced h w monitor security exit 53
- V02 4 c copyright 1985 2005 american megatrends inc 53
- 3 3 3 3 security screen security screen security screen security screen security screen 54
- 54 54 54 54 54
- Bios setup utility 54
- In this section you may set or change the supervisor user password for the system for the user password you may also clear it 54
- Main oc tweaker advanced h w monitor boot exit 54
- Security 54
- Security settings 54
- V02 4 c copyright 1985 2005 american megatrends inc 54
- 3 3 3 3 exit screen exit screen exit screen exit screen exit screen 55
- 55 55 55 55 55
- Bios setup utility 55
- Exit options 55
- Main oc tweaker advanced h w monitor boot security 55
- Save changes and exit when you select this option it will pop out the following message save configuration changes and exit setup select ok to save the changes and exit the bios setup utility discard changes and exit when you select this option it will pop out the following message dis card changes and exit setup select ok to exit the bios setup utility without saving any changes discard changes when you select this option it will pop out the following message dis card changes select ok to discard all changes load bios defaults load bios default values for all the setup questions f9 key can be used for this operation load performance setup default this performance setup default may not be compatible with all system configurations if system boot failure occurs after loading please resume optimal default settings f5 key can be used for this operation load power saving setup default load power saving setup default f6 key can be used for this operation 55
- V02 4 c copyright 1985 2005 american megatrends inc 55
- 4 4 4 4 sof sof sof sof software suppor tware suppor tware suppor tware suppor tware supporttttt 56
Похожие устройства
- ASRock 960GM-GS3 FX Инструкция по эксплуатации
- DAB KP 38/18 M Инструкция по эксплуатации
- DAB KP 38/18 T Инструкция по эксплуатации
- DAB KP 60/6 M Инструкция по эксплуатации
- DAB KP 60/6 T Инструкция по эксплуатации
- DAB KP 60/12 M Инструкция по эксплуатации
- DAB KP 60/12 T Инструкция по эксплуатации
- DAB KPA 40/20 M Инструкция по эксплуатации
- DAB KPA 40/20 T Инструкция по эксплуатации
- ASRock 990FX EXTREME3 Инструкция по эксплуатации
- DAB KPS 30/16 M Инструкция по эксплуатации
- ASRock 990FX EXTREME4 Инструкция по эксплуатации
- DAB KPS 30/16 M-P Инструкция по эксплуатации
- DAB KPS 30/16 T Инструкция по эксплуатации
- ASRock 970 EXTREME4 Инструкция по эксплуатации
- DAB KPF 30/16 M Инструкция по эксплуатации
- DAB KPF 30/16 T Инструкция по эксплуатации
- DAB KPF 45/20 M Инструкция по эксплуатации
- ASRock AD425PV3 Инструкция по эксплуатации
- DAB KPF 45/20 T Инструкция по эксплуатации
Скачать
Случайные обсуждения