Ardo Speedy F60 inox [3/24] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ardo Speedy F60 inox [3/24] English

Ardo Speedy F50 inox [3/24] English
3
ENGLISH
GENERAL
Carefully read the following important information regarding installation
safety and maintenance. Keep this information booklet accessible for
further consultations.
The appliance has been designed as a exhausting version (external
exhaust) or as a filter version (internal air recycle) cooker hood.
SAFETY PRECAUTION
1. ake care when the cooker hood is operating simultaneously with an
open fireplace or burner that depend on the air in the environment and
are supplied by other than electrical energy, as the cooker hood removes
the air from the environment which a burner or fireplace need for
combustion.
The negative pressure in the environment must not exceed 4 Pa (4 x
10 -5 bar).
Provide adequate ventilation in the environment for a safe operation of
the cooker hood.
Follow the local laws applicable for external air evacuation.
2. WARNING!!
In certain circumstances electrical appliances may be a danger
hazard.
A) Do not check the status of the filters while the cooker hood
is operating
B) Do not touch the light bulbs after appliance use
C) Flambè cooking is prohibited underneath the cooker hood
D) Avoid free flame, as it is damaging for the filters and a fire
hazard
E) Constantly check food frying to avoid that the overheated oil
may become a fire hazard
F) Disconnect the electrical plug prior to any maintenance.
INSTALLATION INSTRUCTIONS
• Electric Connection
The appliance has been manufactured as a class II, therefore no earth
cable is necessary.
The connection to the mains is carried out as follows:
BROWN = L line
BLUE = N neutral
If not provided, connect a plug for the electrical load indicated on the
description label. Where a plug is provided, the cooker hood must be
installed in order that the plug is easily accessible.
An omnipolar switch with a minimum aperture of 3mm between
contacts, in line with the electrical load and local standards, must be
placed between the appliance and the network in the case of direct
connection to the electrical network.
• The appliance must be installed at a minimum height of 650 mm from
an cooker stove.
If a connection tube composed of two parts is used, the upper part must
be placed outside the lower part.
Do not connect the cooker hood exhaust to the same conductor used
to circulate hot air or for evacuating fumes from other appliances
generated by other than an electrical source.
• ATTENTION: should the lamps not work, make sure they are well
tightened.
• MOUNTING OF THE HOOD IN THE LOWER PART OF AN
HANGING CUPBOARD
Drill 4 holes of 6 mm. diameter at the bottom of the hanging cupboard
as showed in the drawing fig.3.
Fit the hood in the cabinet with 4 screws, which are appropriate to that
kind of cupboard.
The appliance is provided with 2 air outlets, one which is in the upper
part and the other on the back. Both of them can be used according to
your requirements. A connecting ring (C), which to join the connecting
pipe to,and a cover (A) to close the air outlet, which is not used, are
supplied.
• MOUNTING OF THE HOOD IN THE WALL
Make 4 holes (B-P) according to the measurements indicated in fig. 2.
For the various assembly operations, use screws and anchors suitable
for the type of wall (eg., concrete, plasterboard, etc.)
Hang the hood on the wall using the two holes (B) fig. 2.
Secure the hood to the wall using the two lower safety holes (P).
• MOUNTING OF THE HOOD ON THE WALL
Drill 2 holes on the wall, which correspond to the position (B) of the
drawing fig. 1.
Hang the hood on the 2 holes by using the screws and dowels with
expanding plug ,which are aprropriate for that kind of wall (ex.
concrete, plasterboard etc.)
Fix definitely the hood through the 2 security holes (Z).
• FITTING THE PIPES (OPTIONAL)
Make four holes (G-H) according to the measurements indicated in
fig. 2
For the various assembly operations, use screws and anchors suitable
for the type of wall (eg., concrete, plasterboard, etc.)
Secure the bracket (Z) to the wall fig. 2
Position the two pipes vertically on the hood.
Hang the pipe fitting (F) using the 2 holes (H) fig. 2
Remove pipe fitting (E) from fitting (F) and secure to the side of the
bracket (Z) with the screws provided.
• FITTING THE GLASS SECTION (OPTIONAL)
Position the glass section complete with supports (V) as indicated in
fig. 1 and secure to the hood using the screws provided.
• FITTING THE HANDLE (OPTIONAL)
Position the handle (M) and the two right (D) and left (S) supports, as
indicated in fig. 1, and secure to the hood using the screws provided.
• CHANGING FROM EXHAUSTING HOOD TO FILTERING ONE
In order to make this change (possible also after the use of the
exhausting system), demand a set of carbon filters to your dealer.
Active carbon filters are necessary to depurate the air, that will be
released in the room. Filters are not washable; they cannot be
regenerated and have to be replaced at most every 4 months. The
saturation of the activated charcoal depends on the more or less
prolonged use of the hood, on the type of cooking and on the regularity
of cleaning the grease filter. The filter (C) has to be applied to the
aspirating group, which is inside the hood hiting the centre of the group
with it and turning it of 90 degrees until the stop click is heard to lock
it. Remove the grill (G) to carry out this operation. Close with the
appropriate covers the upper and back air outlets; turn the small lever
(L) from the position (A) to the position (F). In this way the hood is
ready for the filtering function.
USE AND MAINTENANCE
• It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for 15 minutes
after cooking is terminated in order to completely eliminate cooking
vapours and odours.
The proper function of the cooker hood is conditioned by the regularity
of the maintenance operations, in particular, the active carbon filter.
• The anti-grease filters capture the grease particles suspended in the
air, and are therefore subject to clogging according to the frequency of
the use of the appliance.
In order to prevent fire hazard, it is recommendable to clean the filter
at a maximum of 2 months by carrying out the following instructions:
- Remove the filters from the cooker hood and wash them in a solution
of water and neutral liquid detergent, leaving to soak.
- Rinse thoroughly with warm water and leave to dry.
- The filters may also be washed in the dishwasher.
The aluminium panels may alter in colour after several washes. This
is not cause for customer complaint nor replacement of panels.
• The active carbon filters purify the air that is replaced in the
environment. The filters are not washable nor re-useable and must be
replaced at maximum every four months. The saturation of the active
carbon filter depends on the frequency of use of the appliance, by the
type of cooking and the regularity of cleaning the anti-grease filters.
• Clean the fan and other surfaces of the cooker hood regularly using
a cloth moistened with denatured alcohol or non abrasive liquid
detergent.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
EVENTUAL DAMAGES CAUSED BY BREACHING THE ABOVE
WARNINGS.
ENGLISH

Содержание

Похожие устройства

ENGLISH GENERAL Carefully read Ihe following important information regarding installation safety and maintenance Keep this information booklet accessible for further consultations The appliance has been designed as a exhausting version external exhaust or as a filter version internal air recycle cooker hood SAFETY PRECAUTION 1 ake care when the cooker hood isoperating simultaneously with an open fireplace or burner that depend on the air in the environment and ate supplied by other than electrical energy as the cooker hood removes the air from the environment which a burner or fireplace need for combustion The negative pressure in the environment must not exceed 4 Pa 4 x 10 5 bar Provide adequate ventilation in the environment for a safe operation of the cooker hood Follow the local laws applicable for external air evacuation 2 WARNING In certain circumstances electrical appliances may be a danger hazard A Do not check the status of the filters while the cooker hood is operating B Do not touch the light bulbs after appliance use C Flambé cooking is prohibited underneath the cooker hood D Avoid free flame as it is damaging for the filters and a fire hazard E Constantly check food frying to avoid that the overheated oil may become a fire hazard F Disconnect theelectrical plug priortoany maintenance INSTALLATION INSTRUCTIONS Electric Connection The appliance has been manufactured as a class II therefore no earth cable is necessary The connection to the mains iscarried out as follows BROWN L line BLUE N neutral If not provided connect a plug for the electrical bad indicated on the description label Where a plug is provided the cooker hood must be installed in order that the plug is easily accessible An omnipolar switch with a minimum aperture of 3mm between contacts in line with the electrical bad and local standards must be placed between the appliance and the network in the case of direct connection to theelectrical network The appliance must be instalbd at a minimum height of 650 mm from an cooker stove If a connectbn tube composed of two parts is used the upper part must be placed outside the lower part Do not connect the cooker hood exhaust to the same conductor used to circulate hot air or for evacuating fumes from other appliances generated by other than an electrical source ATTENTION should the lamps not work make sure they are well tightened MOUNTING OF THE HOOD IN THE LOWER PART OF AN HANGING CUPBOARD Drill 4 holesof 6 mm diameter atthebottom of the hanging cupboard asshowed in the drawing fig 3 Fit the hoodin the cabinet with4 screws which are appropriate tothat kind of cupboard The appliance is provided with 2 airoutbts one which is in the upper partand theotheron the back Bothof themcan beusedaccording to your requirements A connecting ring C which tojoin the connecting pipe to and a cover A to close the air outlet wh ich is not used are supplied MOUNTING OF THE HOOD IN THE WALL Make4 holes B P according to the measurements indicatedin fig 2 For the various assembly operatbns use screwsand anchors suitable for the type of wall eg concrete plasterboard etc Hang the hood on the wall using the two holes B fig 2 Secure the hood to the wall using the two bwer safety hobs P MOUNTING OF THE HOOD ON THE WALL Drill 2 holes on the wall which correspond to the position B of the drawing fig 1 Hang the hood on the 2 holes by using the screws and dowels with expanding plug which are aprropriate for that kind of wall ex concrete plasterboard etc Fix defin itely the hood through the 2 security holes Z FITTING THE PIPES OPTIONAL Make four holes G H according to the measurements indicated in fig 2 For thevariousassemby operatbns use screws and anchors su I able for the type of wall eg concrete plasterboard etc Secure the bracket Z to the wall fig 2 Position the two pipes vertically on the hood Hang the pipe fitting F using the 2 holes H fig 2 Remove pipe fitting E from fitting F and secure to the side of the bracket Z with the screws provided FITTING THE GLASS SECTION OPTIONAL Position theg lass section complete with supports V as indicated in fig 1 and secure to the hood using the screws provided FITTING THE HANDLE OPTIONAL Position the hand b M and the two right D a nd left S supports as indicatedin fig 1 and secure to the hood using the screws provided CHANGING FROM EXHAUSTING HOOD TO FILTERING ONE In order to make this change possible also after the use of the exhausting system demand a set of carbon filters to your dealer Active carbon filters are necessary to depurate the air that will be released in the room Filters are not washable they cannot be regenerated and have to be replaced at most every 4 months The saturation of the activated charcoal depends on the more or less probnged useof the hood on the type of cooki ng andon the regularity of cleaning the grease filter The filter C has to be applied to the aspirating group which is inside the hood hiting thecentreof the group with itand tu rning it of 90 degrees until the stop click is heard to lock it Remove the grill G to carry out this operation Close with the appropriate covers the upper and back airoutlets turn the small bver L from the position A to the position F In this way the hood is readyforthe filtering function USE AND MAINTENANCE It is recommended to operate the appliance prior to cooking It is recommended to leave the appliance in operation for 15 minutes after cooking is terminated in order to completely eliminate cooking vapours and odours The proper function of the cooker hood is conditioned by the regularity of the maintenance operatbns in particular the active carbon filter The anti grease filters capture the grease particbs suspended in the air and are therefore subject to clogging according to the frequency of the use of the appliance In order to prevent fire hazard it is recommendable toeban the filter at a maximum of 2 months by carrying out the following instructbns Remove the filters from the cooker hood and wash them in a solutbn of water and neutral liquid detergent having to soak Rinse thoroughly with warm water and leave to dry The filters may also be washed in the dishwasher The aluminium panels may alter in cobur after several washes This is not cause for customer complaint nor replacement of panels The active carbon filters purify the air that is replaced in the environment The filters are not washabb nor re useabb and must be replaced at maximum every four months The saturation of the active carbon filter depends on the frequency of use of the appliance by the type of cooking and the regularity of cleaning the anti grease filters Clean the fan and other surfaces of the cooker hood regularly using a cloth moistened with denatured alcohol or non abrasive liquid detergent THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGESCAUSED BY BREACHING THE ABOVE WARNINGS 3

Скачать
Случайные обсуждения

Ответы 0

Разобрали вытяжку, почистили от загрязнений. А собрать не можем. Забыли последовательность.
3 года назад