Trendnet TEG-2248WS Инструкция по эксплуатации онлайн [31/46] 15593

Speed/Disable:

This setting has six modes—100M Full, 100M Half, 10M Full, 10M

Half, Auto and Disable—for speed or port disable selections.

Note: If speed set to be exist 100M full mode or 10M full mode, flow control have fixed

setting to disable

Flow Control:

This setting determines whether or not the Switch will be handling

flow control. Set FlowCtrl to Enable for avoiding data transfer

overflow. Or it sets to Disable; there is either no flow control or other

hardware/software management.

When the port is set to forced mode, then the flow control will

automatically set to Disable.

Note: Sending packets between two groups may cause packet lost

QoS:

In some ports that need to have a high priority to manage the data

transfer, QoS should be change. Set the port’s QoS to high to

determine the port will always transfer their data first.

Note: QoS function can be working in any port either from port 1 to port 24 or from

port 25 to port 52.However, QoS setting can not be working in different port

group. For example, we set port 1 and port 25 priority high. When we send

packet to port 26, port 1's QoS doesn't work. In the same way, port 25's QoS

doesn't work when we send packet to port 2.