Karcher NT 35/1 Tact Te H [19/288] Start up

Karcher NT 35/1 Tact Te H [19/288] Start up
- 3
The appliance allows 2 operating modes:
1 Industry vacuum cleaner mode (socket
not used)
2 Dedusting mode (socket used)
Î Connect the suction hose and insert in-
sert the suction nozzle or connect to the
dust-generating device depending on
the operating mode.
Warning
Do not vacuum without the filter elements;
otherwise, the suction motor can get dam-
aged and this can be hazardous to health
on account of increased release of fine dust
particles.
The horn blows when the air speed falls be-
low 20 m/s.
Note: The horn reacts to negative pressure.
Î Set the rotary switch to the correct suc-
tion hose cross-section.
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
The appliance is equipped with a paper
filter bag fitted with locking lid.
Order No. Safety filter sack: 6.904-
266.0 (5 pieces)
Note:You can use this appliance to take up
all types of dust up to dust class H. It is stat-
utorily necessary to use a dust collection
bag (see Filter systems for order number).
Note: The appliance is suited as industrial
vacuum cleaner and as dedusting device
for the mobile operation to take up dry, non-
combustible dusts with MAK values.
Unused flat-fold filters may only be
stored and transported in the packaging
(carton).
Illustration
The lamella of the flat-fold filter should
not be touched during installation.
Warning
The flat-fold filter and the safety filter sack
must never be removed during the dust ex-
traction process.
Î Release and remove the suction head.
Illustration
Î Insert the safety filter sack.
Illustration
Î Pull the safety filter sack over the container.
Î Insert and lock the suction head.
Danger
No dusts hazardous to health should be
sucked in during wet vacuuming.
Illustration
Î Remove the brush strips.
Î Install the rubber lips.
Note: The structured side of the rubber lips
must point outwards.
Illustration
Î Properly insert the connection socket in
the suction connection.
Î Push in the connection socket until it
locks into place.
Î Turn the suction connection with the
connection socket to the right to close it
tightly.
Note: The accurate fit is ensured by means
of a "bayonet connection".
Î Release and remove the suction head.
Illustration
Î Pull over the safety filter sack.
Illustration
Î Pull out the safety sheet.
Î Close the safety filter sack using the self-ad-
hesive flap.
Î Pull the safety filter sack towards the rear.
Illustration
Î Close tightly the opening of the suction
connection of the safety filter sack using
the closing lid.
Start up
Horn
Anti-static system
Dry vacuum cleaning
Installing the safety filter sack
Wet vacuum cleaning
Inserting the rubber lips
Close the suction connection
Removing the safety filter sack
19EN

Содержание

Похожие устройства

Скачать