Zyxel IES4005 [22/236] Chapter 3 management cards

Chapter 3 Management Cards

IES4005M User’s Guide

3.1.2 MSC1401G Ports

This table describes the ports on the MSC1401G.

Note: Install the management card before you make the hardware connections. See

Section 8.3.1 on page 61.

3.1.3 GPON SFP Transceiver Specifications

See Chapter 7 on page 57 for the optical specifications of the supported optical transceivers.

3.1.4 MSC1401G Specifications

Note: The following table lists the MSC1401G’s specifications.

ACT Green On The IES is provisioned.

Blinking The IES is being provisioned.

Off The connection is idle.

The following LEDs apply to the Ethernet management port.

Green Blinking There is Ethernet traffic at 10 Mbps.

On A 10 Mbps Ethernet link is up.

Off The 10 Mbps Ethernet link is down.

Amber

Blinking There is Ethernet traffic at 100 Mbps.

On A 100 Mbps Ethernet link is up.

Off The 100 Mbps Ethernet link is down.

Table 1 MSC1401G LED Descriptions (continued)

LED COLOR STATUS DESCRIPTION

Table 2 MSC1401G Port Descriptions

LABEL DESCRIPTION

SFP1, SFP2 These PON interfaces consist of SFP transceiver slots for connecting to the IES.

ALARM This RJ-45 connector is for connecting to alarm output terminals on other equipment.

CONSOLE2 This RJ-45 RS-232 port is for connecting to a UPS. When you deploy the IES4005M with a

UPS, only the POTS modules function during a power outage so subscribers can still make

emergency calls.

Note: At the time of writing, the IES only complies with a Delta GES-R1K UPS.

MGMT This is an RJ-45 Ethernet port for connecting to an Ethernet network for out-of-band

management (a separate channel for management that is not part of the channels that are

usually used for data transfer).

CONSOLE1 This mini RJ-11 port is for connecting to a computer for local management.