![LSI Logic megaraid sas 9260-8i kit [35/92] A k ve ve](/img/pdf.png)
LSI Logic megaraid sas 9260-8i kit [35/92] A k ve ve
![LSI Logic megaraid sas 9240-4i sgl [35/92] A k ve ve](/views2/1171787/page35/bg23.png)
LSI Corporation
- 35 -
6Gb/s MegaRAID SAS RAID Controllers User Guide
August 2013
MegaRAID SAS RAID Controller Characteristics
6Gb/s MegaRAID SAS RAID Controller Family
3.1.2.3 MegaRAID SAS 9260CV-4i and MegaRAID SAS 9260CV-8i RAID Controllers – Board Layout and
Jumper/Connector Information
This subsection provides the board layout, and connector and jumper information for the RAID controller. The
following figure shows the location of the jumpers and the connectors on the MegaRAID SAS 9260CV-8i RAID
controller. The jumpers are set at the factory, and you usually do not need to change them.
NOTE The MegaRAID SAS 9260CV-4i RAID controller does not contain the
JT2B1 connector, which supports ports 4 to 7. The JT2B1 connector is
on the MegaRAID SAS 9260CV-8i RAID controller.
Figure 12 Card Layout for the MegaRAID SAS 9260CV-8i RAID Controller
NOTE Pin 1 on the headers and connectors is highlighted in red in this figure.
J4B2 x4 SAS Ports 12 to 15 Internal connector SFF-8087 x4 internal mini SAS connector
Connects the controller by cable to SAS drives or
SATA 2 drives.
J5A2 Write-Pending LED header 2-pin connector
Connects to an LED that indicates when the data in the
cache has yet to be written to the storage devices. Used
when the write-back feature is enabled.
J5B3 Universal Asynchronous Receiver/Transmitter (UART)
debugging
4-pin connector
Reserved for LSI use.
Table 5 MegaRAID SAS 9260-16i RAID Controller – Connectors (Continued)
Jumper/
Connector
Type Description
J5A2
ak
+ve -ve
85081-00
JT1A1
JT1A2
JT1A3
Ports 3-0Ports 7-4
JT1A4
JT1B1
JT2B1
JT2B2
JT1B2
JT6A1
JT6A2
JT6A3
J5A1
Содержание
- Gb s megaraid sas raid controllers 1
- Gb s megaraid sas raid controllers user guide 1
- User guide 1
- Revision history 2
- Table of contents 3
- Chapter 1 overview 5
- Megaraid sata sas controllers with disk encryption support 5
- Megaraid sata sas controllers with support for battery backup units and cache vault modules 5
- Overview 5
- General description 6
- Sas sata standards and communication protocols 6
- 6gb s megaraid sata sas raid controller detailed descriptions 7
- Gb s megaraid sata sas raid controller detailed descriptions 7
- Megaraid sas 9240 raid controllers 7
- Megaraid sas 9260 raid controllers 7
- Megaraid sas 9261 raid controller 7
- Megaraid sas 9265 raid controllers 8
- Megaraid sas 9266 raid controllers 8
- Megaraid sas 9270 raid controller 8
- Megaraid sas 9271 raid controllers 8
- Megaraid sas 9280 raid controllers 8
- Configuration scenarios 9
- Megaraid sas 9285 raid controllers 9
- Megaraid sas 9286 raid controllers 9
- Benefits of the sas interface 10
- C interface 10
- Figure 1 example of an lsi sas direct connect application 10
- Figure 2 example of an lsi sas raid controller configured with an lsisasx12 expander 10
- Flash rom sas pcie raid controller 10
- Nvsram 10
- Pcie interface 10
- Psbram 10
- Sas is a serial point to point enterprise level device interface that leverages the proven scsi protocol set sas is a convergence of the advantages of sata scsi and fibre channel and it is the future mainstay of the enterprise and high end workstation storage markets sas offers a higher bandwidth per pin than parallel scsi and it improves signal and data integrity 10
- Sas raid controller 10
- Sas sata iii device 10
- Sas sata iii device 32 bit memory address data bus 10
- The following figure shows an example of a sas raid controller configured with an lsisasx12 expander that is connected to sas drives sata iii drives or both 10
- The sas interface uses the proven scsi command set to ensure reliable data transfers while providing the connectivity and flexibility of point to point serial data transfers the serial transmission of scsi commands eliminates clock skew challenges the sas interface provides improved performance simplified cabling smaller connectors lower pin count and lower power requirements when compared to parallel scsi 10
- Operating system support 11
- Pcie architecture 11
- Summary of 6gb s megaraid sata sas raid controller characteristics 11
- Sas features 12
- Although you can have up to 16 virtual drives per drive group and up to 128 drive groups on most of the controllers a limit of 64 virtual drives exists on those controllers 13
- Data transfer using scsi information units 13
- Sas array limitations 13
- Support of narrow ports consisting of a single phy 13
- Support of wide ports that consist of two three or four phys within a single quad port 13
- The following table lists the array limitations for the megaraid 6gb s sas raid controllers 13
- The maximum numbers in the previous table depend on how many physical devices you have connected to the raid controller for example the maximum number of drive groups is equal to the number of drives that are supported by the controller thus for the megaraid sas 9240 4i raid controller the maximum number of drive groups per controller is 16 which is based on the maximum number of physical devices that you can connect in addition the maximum number of hot spares per controller is equal to the maximum number of drives per controller 13
- These raid controllers support 64 bit logical block addressing lba which makes it possible to connect a large number of drives to the raid controller directly and through expanders however the actual number of drives that you can attach depends on the limits listed in this table rather than by actual raid volume capacity 13
- This section describes the array limitations of the megaraid 6gb s sas raid controllers these limitations include the number of drives supported per controller the maximum number of drives per controller and the maximum number of virtual drives allowed per controller 13
- Flexibility features 14
- Pcie performance 14
- Sata iii features 14
- Usability features 14
- Drive migration 15
- Drive roaming 15
- Hardware specifications 16
- Technical support 19
- Chapter 2 megaraid sas hardware installation 20
- Quick installation 20
- Requirements 20
- Detailed installation 21
- After installing the raid controller 23
- Sas device cables and connectors 23
- Connecting a sas raid controller with internal connectors to the drives 25
- Figure 6 sas plugs and sata plugs and sas backplane receptacle connector 25
- Follow these steps to connect your raid controller with internal sas port connectors directly to sas drives or sata drives 25
- If you have another drive connect it to another plug on the internal cable 25
- Insert the sff 8087 x4 internal mini sas connector on the cable into a sff 8087 x4 internal mini sas connector on the megaraid sas 9260 8i raid controller as shown in the following figure 25
- Note the megaraid sas 9260 8i raid controller is shown as an example you can connect other megaraid sas controllers with internal sas port connectors in the same way 25
- Plug the hdd connector on the other end of the internal cable into the connector on the sas drive or the sata drive 25
- The following subsections provide step by step instructions for connecting the megaraid sas raid controllers to sas drives and sata drives either directly or through an expander 25
- This section provides step by step instructions for connecting the sas cable from the internal connectors on the raid controller to sas drives and sata drives 25
- You can connect other devices if the cable has more connectors 25
- Connecting a raid controller with external connectors to a drive enclosure 26
- Figure 8 connecting the megaraid sas 9280 8e raid controller to a drive enclosure 27
- Ibbu top view 27
- Mini sas x4 cable plug connector 27
- To drive enclosure 27
- 6gb s megaraid sas raid controller family 28
- Chapter 3 megaraid sas raid controller characteristics 28
- Gb s megaraid sas raid controller family 28
- Megaraid sas 9240 raid controllers 28
- Megaraid sas 9260 raid controllers 29
- The following table describes the jumpers and the connectors on the megaraid sas 9240 4i and megaraid sas 9240 8i raid controllers 29
- The megaraid sas 9260 16i standard height sas sata raid controller controls 16 internal sas sata ports through four sff 8087 x4 internal mini sas connectors 29
- The megaraid sas 9260 4i low profile sas sata raid controller controls four internal sas sata ports through one sff 8087 x4 internal mini sas connector 29
- The megaraid sas 9260 8i low profile sas sata raid controller controls eight internal sas sata ports through two sff 8087 x4 internal mini sas connectors 29
- The megaraid sas 9260cv 4i low profile sas sata raid controller controls four internal sas sata ports through one sff 8087 x4 internal mini sas connector and has a nonvolatile cvfm01 module attached the cvfm01 module connects to a cvpm01 module to provide backup for your data in case of power loss 29
- The megaraid sas 9260cv 8i low profile sas sata raid controller controls eight internal sas sata ports through two sff 8087 x4 internal mini sas connectors and has a nonvolatile cvfm01 module attached the cvfm01 module connects to a cvpm01 module to provide backup for your data in case of power loss 29
- The megaraid sas 9260de 8i low profile sas sata raid controller controls eight internal sas sata ports through two sff 8087 x4 internal mini sas connectors and offers data security by using disk encryption 29
- Megaraid sas 9260 4i sas 9260 8i and sas 9260de 8i raid controllers board layout and jumper connector information 30
- Note jt1 jt2 and jt4 are behind the lsiibbu07 unit when the ibbu unit is installed but they are still accessible 30
- Note pin 1 on the headers and connectors is highlighted in red in this figure 30
- Note the megaraid sas 9260 4i raid controller has the same connectors as the megaraid sas 9260 8i raid controller except for the jt7 connector which supports ports 4 to 7 the megaraid sas 9260de 8i raid controller has the same connectors as the megaraid sas 9260 8i raid controller 30
- The following table describes the jumpers and connectors on the megaraid sas 9260 4i sas 9260 8i and sas 9260de 8i raid controllers 30
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9260 4i sas 9260 8i and sas 9260de 8i raid controllers the following figure shows the connectors on the megaraid sas 9260 8i raid controller 30
- Megaraid sas 9260 16i raid controller board layout and jumper connector information 32
- Note pin 1 on the headers and connectors is highlighted in red in this figure 32
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9260 16i raid controller the following figure shows the jumpers and connectors on the megaraid sas 9260 16i raid controller 32
- Port 0 33
- Port 7 33
- The following table describes the jumpers and the connectors on the megaraid sas 9260 16i raid controller it includes diagrams that show pin1 and its orientation for several of the connectors 33
- A k ve ve 34
- Port 15 34
- Port 8 34
- Ve a k ve 34
- A k ve ve 35
- Megaraid sas 9260cv 4i and megaraid sas 9260cv 8i raid controllers board layout and jumper connector information 35
- Note pin 1 on the headers and connectors is highlighted in red in this figure 35
- Note the megaraid sas 9260cv 4i raid controller does not contain the jt2b1 connector which supports ports 4 to 7 the jt2b1 connector is on the megaraid sas 9260cv 8i raid controller 35
- This subsection provides the board layout and connector and jumper information for the raid controller the following figure shows the location of the jumpers and the connectors on the megaraid sas 9260cv 8i raid controller the jumpers are set at the factory and you usually do not need to change them 35
- Port 0 36
- Port 7 36
- The following table describes the jumpers and the connectors on the megaraid sas 9260cv 8i raid controller 36
- A k ve ve 37
- Ve a k ve 37
- Megaraid sas 9261 8i raid controller board layout and jumper connector information 38
- Megaraid sas 9261 raid controller 38
- The following table describes the jumpers and the connectors on the megaraid sas 9261 8i raid controller 38
- The megaraid sas 9261 8i low profile sas sata raid controller controls eight internal sas sata ports through two sff 8087 mini sas 4i connectors 38
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9261 8i raid controller the following figure shows the jumpers and connectors on the megaraid sas 9261 8i raid controller 38
- Megaraid sas 9265 raid controllers 39
- A k ve ve 40
- J1a4 ve a k ve 40
- The following table describes the jumpers and the connectors on the megaraid sas 9265 8i raid controller 40
- A k ve ve 42
- Megaraid sas 9265cv 8i raid controller board layout and jumper connector information 42
- Note pin 1 on the headers and connectors is highlighted in red in this figure 42
- The following figure shows the location of the jumpers and the connectors on the megaraid sas 9265cv 8i raid controller the jumpers are set at the factory and you usually do not need to change them 42
- The following table describes the jumpers and the connectors on the megaraid sas 9265cv 8i raid controller 42
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9265cv 8i raid controller 42
- J1a4 ve a k ve 43
- Megaraid sas 9266 raid controllers 44
- Note the megaraid sas 9266 4i raid controller does not contain the j5b1 connector which supports ports 4 to 7 the j5b1 connector is on the megaraid sas 9266 8i raid controller 44
- The megaraid sas 9266 4i low profile sas sata raid controller controls four internal sas sata ports through one sff 8087 mini sas 4i internal connector 44
- The megaraid sas 9266 8i low profile sas sata raid controller controls eight internal sas sata ports through two sff 8087 mini sas 4i internal connectors this controller supports a nonvolatile cvfm02 module that connects to a cvpm02 module to provide backup for your data in case of power loss 44
- Megaraid sas 9266 raid controller board layout and jumper connector information 45
- The following figure shows the jumpers and the connectors on the raid controller the jumpers are set at the factory and you usually do not need to change them 45
- The following table describes the jumpers and the connectors on the megaraid sas 9266 raid controller 45
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9266 8i raid controller the megaraid sas 9266 4i raid controller is the same as the megaraid sas 9266 8i raid controller except that it does not support the j5b1 port connector 45
- A k ve ve 47
- Megaraid sas 9270 8i raid controller board layout and jumper connector information 47
- Megaraid sas 9270 raid controller 47
- Note pin 1 on the headers and connectors is highlighted in red in this figure 47
- The following table describes the jumpers and the connectors on the megaraid sas 9270 8i raid controller 47
- The megaraid sas 9270 8i low profile sas sata disk array controller controls eight internal sas sata ports through two sff 8087 mini sas 4i internal connectors 47
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9270 8i raid controller the following figure shows the location of the jumpers and the connectors on the megaraid sas 9270 8i raid controller the jumpers are set at the factory and you usually do not need to change them 47
- J1a4 ve a k ve 48
- Megaraid sas 9271 raid controllers 49
- Note the megaraid sas 9271 4i raid controller does not contain the j5b1 connector which supports ports 4 to 7 the j5b1 connector is on the megaraid sas 9271 8i raid controller and on the megaraid sas 9271 8icc raid controller 49
- The megaraid sas 9271 4i low profile sas sata raid controller controls four internal sas sata ports through one sff 8087 mini sas 4i internal connector 49
- The megaraid sas 9271 8i low profile sas sata raid controller controls eight internal sas sata ports through two sff 8087 mini sas 4i internal connectors this controller supports a nonvolatile cvfm02 module that connects to a cvpm02 module to provide backup for your data in case of power loss 49
- The megaraid sas 9271 8icc raid controller controls eight internal sas sata ports through two sff 8087 mini sas 4i internal connectors this raid controller ships as standard with cachecade cc pro 2 and fast path software enabled out of the box 49
- Megaraid sas 9271 raid controller board layout and jumper connector information 50
- Note pin 1 on the headers and connectors is highlighted in red in this figure 50
- The following figure shows the jumpers and the connectors on the raid controller the jumpers are set at the factory and you usually do not need to change them 50
- The following table describes the jumpers and the connectors on the megaraid sas 9271 raid controllers 50
- This subsection provides the board layout and the connector and jumper information for the megaraid sas 9271 8i raid controller 50
- Megaraid sas 9280 raid controllers 52
- The following table describes the jumpers and connectors on the megaraid sas 9280 8e raid controller and the megaraid sas 9280de 8e raid controller 53
- Megaraid sas 9280 4i4e raid controller board layout and jumper connector information 54
- Note the j6a1 j6a2 and j6a3 connectors are behind the ibbu unit when the unit is installed but are still accessible 54
- The following figure shows the jumpers and the connectors on the megaraid sas 9280 4i4e controller 54
- The following table describes the jumpers and the connectors on the megaraid sas 9280 4i4e raid controller 54
- This subsection provides the board layout and the connector information for the megaraid sas 9280 4i4e raid controller 54
- J1l1 on back 55
- J2b1 ports 0 3 55
- J2b2 ports 4 7 55
- J3b1 ports 8 11 55
- J4a1 j4a4 j4a5 55
- J4a2 j5a2 55
- J4b2 ports 12 15 j1a2 55
- Megaraid sas 9280 16i4e and megaraid sas 9280 24i4e raid controllers board layout and jumper connector information 55
- Note the j6a1 j6a2 and j6a3 connectors are behind the lsiibbu07 unit when the ibbu unit is installed but are still accessible 55
- The following figure shows the jumpers and the connectors on the megaraid sas 9280 24i4e controller 55
- This subsection provides the board layout and the connector information for the megaraid sas 9280 16i4e raid controller and the megaraid sas 9280 24i4e raid controller 55
- Note pin 1 on the headers and connectors is highlighted in red in this figure 56
- Note the megaraid sas 9280 16i4e raid controller is like the megaraid sas 9280 24i4e raid controller except that the megaraid sas 9280 16i4e controller does not contain the j4a5 j5a1 or j5b2 connectors 56
- Port 0 56
- Port 7 56
- The following table describes the jumpers and the connectors on the megaraid sas 9280 24i4e raid controller it includes diagrams showing pin1 and its orientation for several of the connectors 56
- A k ve ve 57
- Port 15 57
- Port 8 57
- Ve a k ve 57
- A k ve ve 58
- Megaraid sas 9285 raid controllers 58
- Port 16 58
- Port 23 58
- The megaraid sas 9285 8e low profile sas sata raid controller controls eight external sas sata ports through two sff 8088 x4 external mini sas connectors 58
- The megaraid sas 9285cv 8e low profile sas sata raid controller controls eight external sas sata ports through two sff 8088 x4 external mini sas connectors this controller supports the cvfm03 onboard 1 gb nonvolatile ddr3 1333mt s cache vault flash module 03 which connects to a remote cache vault power module 02 to provide backup for your data in case of power loss 58
- A k ve ve 59
- Megaraid sas 9285 8e raid controller board layout and jumper connector information 59
- Note pin 1 on the headers and connectors is highlighted in red in this figure 59
- The following table describes the jumpers and the connectors on the megaraid sas 9285 8e raid controller 59
- This subsection provides the board layout and the connector information for the megaraid sas 9285 8e raid controller the following figure shows the location of the jumpers and the connectors on the megaraid sas 9285 8e raid controller the jumpers are set at the factory and you usually do not need to change them 59
- Ve a k ve 60
- A k ve ve 61
- Megaraid sas 9285cv 8e raid controller board layout and jumper connector information 61
- Note pin 1 on the headers and connectors is highlighted in red in this figure 61
- The following table describes the connectors on the megaraid sas 9285cv 8e raid controller 61
- This subsection provides the board layout and the connector information for the megaraid sas 9285cv 8e raid controller the following figure shows the location of the jumpers and the connectors on the megaraid sas 9285cv 8e raid controller the jumpers are set at the factory and you usually do not need to change them 61
- Megaraid sas 9286 raid controllers 62
- The megaraid sas 9286 8e low profile sas sata raid controller controls eight external sas sata ports through two sff 8088 x4 external mini sas connectors 62
- The megaraid sas 9286cv 8e low profile sas sata raid controller controls eight external sas sata ports through two sff 8088 x4 external mini sas connectors this controller supports the cvfm03 onboard 1 gb nonvolatile ddr3 1333mt s cache vault flash module 03 which connects to a remote cache vault power module 02 to provide backup for your data in case of power loss 62
- The megaraid sas 9286cv 8icc raid controller controls eight internal sas sata ports through two sff 8087 mini sas 4i internal connectors this controller supports the cvfm03 onboard 1 gb nonvolatile ddr3 1333mt s cache vault flash module 03 which connects to a remote cache vault power module 02 to provide backup for your data in case of power loss this raid controller ships as standard with cachecade cc pro 2 and fast path software enabled out of the box 62
- A k ve ve 63
- Megaraid sas 9286 8e raid controller board layout and jumper connector information 63
- Note pin 1 on the headers and connectors is highlighted in red in this figure 63
- The following table describes the jumpers and the connectors on the megaraid sas 9286 8e raid controller 63
- This subsection provides the board layout and the connector information for the megaraid sas 9286 8e raid controller the following figure shows the location of the jumpers and the connectors on the megaraid sas 9286 8e raid controller the jumpers are set at the factory and you usually do not need to change them 63
- Ve a k ve 64
- A k ve ve 65
- Megaraid sas 9286cv 8e raid controller board layout and jumper connector information 65
- Note pin 1 on the headers and connectors is highlighted in red in this figure 65
- The following table describes the connectors on the megaraid sas 9286cv 8e raid controller 65
- This subsection provides the board layout and the connector information for the megaraid sas 9286cv 8e raid controller the following figure shows the location of the jumpers and the connectors on the megaraid sas 9286cv 8e raid controller the jumpers are set at the factory and you usually do not need to change them 65
- Megaraid sas 6gb s raid controller characteristics 67
- Technical specifications 67
- Cache vault flash module 01 model cvfm01 68
- Cache vault flash module 02 model cvfm02 68
- Cache vault flash module 03 model cvfm03 68
- Cache vault power module 01 model cvpm01 68
- Cache vault power module 02 model cvpm02 68
- Lsi intelligent battery backup unit 07 model 25034 68
- Lsi intelligent battery backup unit 08 model 25343 68
- Lsi intelligent battery backup unit 09 model 25407 68
- Megaraid sas 9266 8i raid controller model 25413 00 68
- Megaraid sas 9270 8i raid controller model 25422 68
- Megaraid sas 9271 4i raid controller model 25413 68
- Megaraid sas 9271 8i raid controller model 25413 68
- Megaraid sas 9271 8icc raid controller model 25413 68
- Megaraid sas 9280 16i4e raid controller model 25243 68
- Megaraid sas 9280 24i4e raid controller model 25243 68
- Megaraid sas 9280 4i4e raid controller model 25305 68
- Megaraid sas 9280 8e raid controller model 25152 68
- Megaraid sas 9280de 8e raid controller model 25152 68
- Megaraid sas 9285 8e raid controller model 25367 68
- Megaraid sas 9285cv 8e raid controller model 25421 68
- Megaraid sas 9286 8e raid controller model 25421 68
- Megaraid sas 9286cv 8e raid controller model 25421 68
- Megaraid sas 9286cv 8ecc raid controller model 25421 68
- Raid controller specifications 69
- The following table lists the specifications for the 6gb s megaraid sas raid controllers 69
- Array performance features 72
- Fault tolerance 72
- The following table lists the fault tolerance features for the 6gb s megaraid sas raid controllers 72
- The following table shows the array performance features for the 6gb s megaraid sas raid controllers 72
- Electrical characteristics and environmental conditions 73
- Safety characteristics 88
- Glossary 89
Похожие устройства
- Lamborghini wbl 4 Инструкция по эксплуатации
- Lamborghini axe 3 32 r Инструкция по эксплуатации
- Lamborghini axe 3 47 r Инструкция по эксплуатации
- Lamborghini eco 5r Инструкция по эксплуатации
- Lamborghini eco 3r Инструкция по эксплуатации
- Lamborghini wbl 7 Инструкция по эксплуатации
- Landmann black pearl comfort 31341 Инструкция по эксплуатации
- Landmann 11430 Инструкция по эксплуатации
- Landmann 12375 Инструкция по эксплуатации
- Landmann 12754 Инструкция по эксплуатации
- Lemantino rcl-02 Инструкция по эксплуатации
- Lemantino scl-01 Инструкция по эксплуатации
- Lemantino rcl-01 Инструкция по эксплуатации
- Lemantino vcl-02 Инструкция по эксплуатации
- Lemantino tcl-02 Инструкция по эксплуатации
- Lemantino travel зеленый Инструкция по эксплуатации
- Lemantino tiny baby бежевый Инструкция по эксплуатации
- Lemantino little king синий Инструкция по эксплуатации
- Lemantino little princess розовый Инструкция по эксплуатации
- Lenovo b590, 59-397712 Инструкция по эксплуатации