Robomow RM200 [35/44] Important information
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Robomow RM200 [35/44] Important information

Robomow RM200 [35/44] Important information
35
Wire
Connector
1
2
3
Wire
Connector
11
22
33
Figure 5.2
Wires splicing
1. Strip one cm (0.5 inch) of
each wire ends together
and twist the stripped ends
together using pliers.
2. Insert the twisted wires into
the splicing connector.
3. Screw the wire connector
on the twisted wires; make
sure is tight.
Figure 5.3
Charging
5.5 Splicing the Perimeter Wire
If the perimeter wire needs to be spliced: Use the connectors supplied in the box, as shown in figure 5.2. It is
waterproof and gives a reliable electrical connection.
IMPORTANT INFORMATION!
Twisted cables, or a screw terminal, insulated with insulation tape is not a satisfactory splice. Soil
moisture will cause the conductors to oxidize and after a while result in broken circuit.
5.6 Winter Storage
Robomow
Remove the battery fuse and clean the Robomow (refer to sections 5.2). Store Robomow indoors in a clean
a dry place, standing on its wheels; confirm the area around the bumper is free.
Insert the battery fuse and connect the power Supply to the mains supply (figure 5.3)
for the entire period
in which Robomow will not be operating; confirm ‘Charging’ is displayed and ‘Ready – keep charging’
when the battery is fully charged.
The charging system and battery are designed such that they can remain plugged in at all times of non-use
without concern to over charging, over heating or damaging the battery.
Perimeter Switch
It is recommended to remove the
Perimeter Switch for the winter period:
- Disconnect the power supply from the mains power;
- Open the Perimeter Switch cover;
- Disconnect all connectors from the board;
- Remove the Perimeter Switch and place it in dry storage;
- Disconnect the green plot connector (keep it connected on the board for the next season) from the
perimeter wire ends and protect it from moisture to prevent corrosion of the wires while not connected to
the Perimeter Switch; You may place the Friendly Robotics wire nut connector onto both wire ends for
protection in the winter.

Содержание

Похожие устройства

Скачать